Country Living
Country Living, Country Skills
Country People

KountryLife.com - A Country Living Resource and Community
Community
Message Board
Country Topics
Trading Post
Memory Lane
Country Skills
Country Cooking

Channels
Gardening
Livestock
The Kitchen
Machinery
Tools

Photographs
Photo Gallery
Vintage Photos
Special Collections

Fun
Country Humor
Country Sounds
Coloring Book
Interactive Story

Farm Tractors
Pictures
Tractor Parts
Tractor Manuals

Miscellaneous
Classic Trucks
Antique Tractors
Modern Tractors
Site Map
Links Page
Contact Us

  
Country Discussion Topics
To add your comments to this topic, click on one of the 'Reply' links below.

Steel shed insulation
[Return to Topics]

joe francano    Posted 11-25-2004 at 14:09:44       [Reply]  [Send Email]
Hello,

I have a steel shed made from corrugated steel. I want to insulate it. The metal is galvanized steel. Any suggestions are appreciated.


marlowe    Posted 11-25-2004 at 17:55:41       [Reply]  [No Email]
1 1/2in thick styrofoam sheets cut to fit next to tin shop is 40x40 16ft. ceiling at -25 it will get to 80 with wood heat going to rock this winter


deadcarp    Posted 11-25-2004 at 17:53:51       [Reply]  [No Email]
joe i don't know if you have a tin-can frame but if so, make sure and don't leave any metal studs uninsulated. darn cold migrates along those things thru the insulation and there will be cold (in our case frost) strips on the inside if they're showing.


donna in w.v    Posted 11-25-2004 at 14:50:24       [Reply]  [Send Email]
we have a 12x12 steel shed I use as a craft workshop. We do wood crafts and we used foam board ,it's about 2 in. thick and we used wire tacked to the wood studs. even in winter i work in there with just a little ceramic heater.hubby is going to sheetrock it this spring.


Salmoneye    Posted 11-25-2004 at 14:18:04       [Reply]  [No Email]
Accordian board...

It is thin 'blue board' (though some is pink) that is folded accordion style...Unfold and cut to fit...To keep it in place you can glue it, nail it, staple it, rivit it, etc....Not the greatest R-value, but better than nothing and easy to work with...

Just a thought...

Now off to the inlaws for Round 2...



[Return to Topics]



[Home] [Search]

Copyright © 1999-2013 KountryLife.com
All Rights Reserved
A Country Living Resource and Community