Country Living
Country Living, Country Skills
Country People - A Country Living Resource and Community
Message Board
Country Topics
Trading Post
Memory Lane
Country Skills
Country Cooking

The Kitchen

Photo Gallery
Vintage Photos
Special Collections

Country Humor
Country Sounds
Coloring Book
Interactive Story

Farm Tractors
Tractor Parts
Tractor Manuals

Classic Trucks
Antique Tractors
Modern Tractors
Site Map
Links Page
Contact Us

Country Discussion Topics
To add your comments to this topic, click on one of the 'Reply' links below.

Old homebuilt implements
[Return to Topics]

Taylor Lambert    Posted 03-05-2001 at 19:25:56       [Reply]  [Send Email]
I was wondering if anyone here has seen many home built implements built in the old days, I ve been fixing an old pulpwood trucks stick wood loader made out af a car transmission and rearend. This got my interest stirred up, Dad had an old 48 Chevy when he was a teenager where he worked at a hardwarestore/ house builder he got a dime for every young pine they stripped to make fence stakes out of. Dad made a rim extension on his car that hed put on at work the had a series of chains on it. It would debark a whole 6 foot post in 10 seconds. Theres all kinds of these implements here like that, just good old enginuity. I know theres been alot of home built tractors here to.

Spencer Greely    Posted 03-08-2001 at 06:26:55       [Reply]  [No Email]
Check out

for ideas and plans.

Ray M41    Posted 03-07-2001 at 13:09:05       [Reply]  [No Email]

Most of my homemade contraptions are pretty crude and not worthy for public viewing. They all worked for the intended purpose though and then were scrapped for other projects. Made this dandy little scraper blade from some discarded culivator parts and odds and ends of scrap metal. The angle and tilt is adjustable. Believe I'll hang on to this one. Rebuilt a 450 4-row cultivator into a 2-row to fit on my M with the rear section made from the outriggers of the front pieces. Works pretty good too.

Gary    Posted 03-06-2001 at 13:14:47       [Reply]  [Send Email]
There is a fourm on yahoo about home made implements.

F14    Posted 03-06-2001 at 03:49:52       [Reply]  [No Email]
Well, I built my own power-lift log arch, if that qualifies.

M.R.    Posted 03-06-2001 at 09:44:56       [Reply]  [No Email]
Hi F14; We made it down to the Oregon Logging Conference & Equipment Show [] this year and what a show, had to see the Lucas portable sawmill operate. Anyway one of the vendors [] there had the logging arch for tractor and ATV's, spiked my interest enough to build one-one of these days.

Robert in W. Mi.    Posted 03-06-2001 at 17:32:36       [Reply]  [Send Email]
Here's the neatest log arch i've seen for an ATV. It lifts the log it self, with out haveing to have a winch ect.. I don't see why it couldn't be sized up for bigger logs.
I have this companys saw mill and edger, and they build good products! Check it out!

F14...Yup    Posted 03-07-2001 at 05:02:41       [Reply]  [No Email]
Cabbaged ideas off of both of them when building mine. Theirs cost $1500 or more, plus shipping. I have about $150 in materials in mine ":^) (already had the winch)

Also, I don't think theirs lifts the entire log clear of the ground. I need to do that as I travel over paved roads, and the town gets a mite testy when ya start dragging stuff down the road...

[Return to Topics]

[Home] [Search]

Copyright © 1999-2013
All Rights Reserved
A Country Living Resource and Community