Country Living
Country Living, Country Skills
Country People - A Country Living Resource and Community
Message Board
Country Topics
Trading Post
Memory Lane
Country Skills
Country Cooking

The Kitchen

Photo Gallery
Vintage Photos
Special Collections

Country Humor
Country Sounds
Coloring Book
Interactive Story

Farm Tractors
Tractor Parts
Tractor Manuals

Classic Trucks
Antique Tractors
Modern Tractors
Site Map
Links Page
Contact Us

Country Discussion Topics
To add your comments to this topic, click on one of the 'Reply' links below.

Remington Mighty Mite Bantam Chainsaw
[Return to Topics]

Peepers    Posted 12-15-2004 at 21:07:09       [Reply]  [No Email]
Does anyone know where I could find a manual or info on a Remington Mighty Mite Bantam chainsaw? I'm in need of a new chain and not sure if the one that was on there was correct or not. I'm also thinking the carb is going to need some work soon.

Tom    Posted 05-01-2009 at 23:55:51       [Reply]  [Send Email]
I have a copy of the parts list as well as an original copy of the owners manual. The manual is 32 pages long and the parts sheets are only three pages. These can be faxed. please advise.

Peter    Posted 07-16-2009 at 14:38:35       [Reply]  [Send Email]
I got a Mighty Mite Chain Saw from my father and would like to get my hands on more information about ir. I would like to try to get an owners manual also.

Jesse E. Smith    Posted 01-28-2006 at 23:47:51       [Reply]  [Send Email]
I am in need of a bar and chain for an old Bantam chain saw any body know where to find them ,the oiler and pull rope is right hand side Thanks

Frank    Posted 01-22-2008 at 13:48:01       [Reply]  [Send Email]
Mighty Mite-Remington Chain Saw Owner's Manual (Copy) - eBay (item 160201301045 end time Jan-26-08 16:40:31 PST)

bill earle    Posted 10-30-2005 at 16:22:09       [Reply]  [Send Email]
I just got a chain saw from my grandpa. I in need of a manual for this saw. It's a mighty mite bantam model # mmb3 serial #1510. any infor would be great.
thany you
bill earle
197 brickcrafters rd
new oxford pa 17350

Jim Scully    Posted 07-03-2007 at 11:21:41       [Reply]  [Send Email]
I have the above saw which is giving me problems. After it runs for a few moments, pressure builds in the gas tank to the point it forces fuel past the seal of the little hose that feeds the carburetor and practically fills the carburetor compartment with fuel. If I crack open the cover to the gas tank, gas blows all over the place until the pressure is released. It looks as though there is an O-ring on the gas cap. The gas cap also has a little groove in it which I believe is meant to control the pressure in the tank. Is it possible the O-ring has deformed and blocking the groove from performing its function. If the O-ring is the problem, I would need the size or part # so I can replace it.

If you don't think that's the problem, can you please tell me what is causing the high pressure build up and how do I fix it. It also seems the saw runs hot.

Please respond via e-mail at your earliest convenience.

Thank you

Jim Scully

egh    Posted 12-15-2004 at 21:15:35       [Reply]  [No Email]
maybe this will help some.

[Return to Topics]

[Home] [Search]

Copyright © 1999-2013
All Rights Reserved
A Country Living Resource and Community