Country Living
Country Living, Country Skills
Country People - A Country Living Resource and Community
Message Board
Country Topics
Trading Post
Memory Lane
Country Skills
Country Cooking

The Kitchen

Photo Gallery
Vintage Photos
Special Collections

Country Humor
Country Sounds
Coloring Book
Interactive Story

Farm Tractors
Tractor Parts
Tractor Manuals

Classic Trucks
Antique Tractors
Modern Tractors
Site Map
Links Page
Contact Us

Country Discussion Topics
To add your comments to this topic, click on one of the 'Reply' links below.

All-Nighter Wood Stove
[Return to Topics]

aquacanis    Posted 06-08-2002 at 15:15:48       [Reply]  [Send Email]
I have finally learned more about the all-nighter wood stove! I was refurbishing an all nighter and I stumbled upon the casting INSIDE the cast iron/glass door. On the bottom of the inside of the door are the words "all-nighter stove works glastanbury, conn. It appears this stove is becoming an icon or something. I think it is probably one of the original air tights that has been overshadowed by many of the newer fancy names. Does anyone know any more about this company? I will continue my search. Thanks and please let me know if you have any info.

Cheryl    Posted 07-21-2009 at 13:46:43       [Reply]  [Send Email]
I have an allnighter wood stove, very clean. Has moe sleeping on door. In Southern NH. $200. Email me at

scott    Posted 01-17-2009 at 09:11:22       [Reply]  [Send Email]
I have an all nighter pudgy glow. coal/wood stove. I need a manual or does anyone know how the damper is hooked up...mine has come unhooked - please call 607-847-9362 or email. Thanks

Steve Buzzell    Posted 03-01-2009 at 17:43:23       [Reply]  [Send Email]
I just bought an All Nighter, Big Moe model, today, used and it came with a one sheet of paper handout. The company is "All Nighter Stove Works, Inc. 80 Commerce Street Glastonbury, Conn 06033. 203-659-0344.

john    Posted 01-12-2009 at 19:44:11       [Reply]  [Send Email]
I sell copies of the original allnighter owner's manual/instruction manual as well as copies of the original catalog describing dimension/weights, specifications, heat outputs in BTU, clearances, UL listing info/proofs, etc and it covers all the models they produced for wood burning versions including a list of factory accessories incl ss heat exchanger for making hot water, screen, coal basket, etc. Price is $25 postpaid. Many people who have purchased these from me have said they found the info invaluable for obtaining a permit from their building dept as well as knowing the correct clearances for their stove and correct piping procedures. The literature totals about 20 pages.

Jean Marie    Posted 12-19-2008 at 13:30:23       [Reply]  [Send Email]
Is there anyone out there with a UL rating on the big moe? Also looking for a copy of a manuel

scooter    Posted 01-01-2009 at 16:47:15       [Reply]  [Send Email]
do you still need a manual for you all nighter stove.

Bill    Posted 01-07-2009 at 14:17:41       [Reply]  [Send Email]
I have a booklet entitled "Installation Instructions for the proper care and safe operation of you new ALL NIGHTER STOVE" published by All Nighter Stove Works West, Inc.from Richmond, Ind. Is this the document some of you are looking for, if so email me. In the mean time - I'm looking to find a replacement window for the door. If anyone knows where I might obtain one, I'd greatly appreciate your response.

moe    Posted 06-18-2009 at 08:15:04       [Reply]  [Send Email]
Just got a mid moe allnighter wood stove and looking for any information at all would help out a lot!!!
thank you, moe

Zack    Posted 11-03-2008 at 13:45:11       [Reply]  [Send Email]
Hi, I'm looking for anyone that has the specs for any of the 'Moes'. I need the paperwork in order to obtain a permit from the town. Any help/guidance anyone could offer would be great. Thanks

scooter    Posted 01-03-2009 at 05:19:12       [Reply]  [Send Email]
they sell them on ebay for 5.00 thanks

Jean Marie    Posted 12-19-2008 at 13:33:24       [Reply]  [Send Email]
I am also looking for info on the all nighter stove. I think I have the big moe. I am looking for the UL rating and manuel

Jim C.    Posted 10-15-2008 at 16:54:33       [Reply]  [Send Email]
Have an all-nighter (pudgy glo) set up for coal with slanted sides to form well. Everyone seems to have some kind of MOE. Does anyone know about mine that has PUDGY-GLO on front of ash pan? Please EMAIL me at or Call 631-375-6224.Thanks so much Jim C.

Dave Bicknell    Posted 11-10-2008 at 13:19:15       [Reply]  [Send Email]
Available immediately a PUDGY GLO ALL NIGHTER coal stove, MOE model. It is ready for install and use. no cracks, door states use nut coal. Had been used for wood fuel. located @ CARROLL NH price $300.00

Bob    Posted 09-25-2008 at 16:18:26       [Reply]  [Send Email]
For Sale - All Nighter Stove Works wood burning stove. Not sure if it's a Mid Moe or a Big Moe - 19"w x 23"h x 26"d. Very good condition. $495 or best offer.

Michelle    Posted 10-27-2008 at 09:06:04       [Reply]  [Send Email]
I am in the Putnam, CT area and looking for an All Nighter for under $300. Please let me know if anyone knows of one available locally.
Thank you!

dan    Posted 12-03-2008 at 15:10:12       [Reply]  [Send Email]
i'm selling a mid moe for 350 in clinton

Michelle    Posted 12-04-2008 at 06:31:03       [Reply]  [No Email]
All set on the stove. Thank you for your replies!

Jon    Posted 11-04-2008 at 17:22:54       [Reply]  [Send Email]

I actually have 2 wood burning all-nighter stoves and I was planning on putting them in the paper this week. I googled them to see if there were any others out there to see what they are going for. I am over the RI line next to glocester...about 20 minutes from Putnam.


Michelle    Posted 11-05-2008 at 05:18:47       [Reply]  [No Email]
Hi Jon,
Do you know which All-Nighters you have (Big Moe, Mid Moe, etc.)? Also, how much are you asking?
Looking forward to hearing from you!
Thank you,

Jon    Posted 11-05-2008 at 15:24:10       [Reply]  [Send Email]
Hi Michelle,

I have 2 mid-moes (I think). They both are identical in that they have a scene on the door of Moe sleeping under a starry sky underneath 2 air vents. I was going to advertise for $450 or B.O. apiece but I'm not set on that. I am certainly willing to negotiate. If you're interested or you want to bargain..just email and I'll give you my phone.

Michelle    Posted 11-07-2008 at 10:13:26       [Reply]  [No Email]
Hi Jon,
I have tried e-mailing you twice. Can you please try getting in touch with me? My e-mail is
Thank you!

Anne and John    Posted 10-05-2008 at 11:27:43       [Reply]  [Send Email]
Interested in your wood stove. Can you tell us more about it? max BTU's per hour, square footage it heats, how long it holds a fire and the heat after the fire has gone out? Whwere are you located?
Anne and John

Arlan    Posted 08-05-2008 at 18:32:04       [Reply]  [Send Email]
I have a Giant Moe that's for sale. In the past it has done an amazing job of heating our split level home. Stove is in great condition. Size is: 31 x 31 x 31 inches. Has the cast iron door with a glass window. Looking for $450 or best offer.

I live in Prior Lake, Minnesota.

Vincent E. Lobosco    Posted 06-25-2008 at 11:12:18       [Reply]  [Send Email]
Have an All Nighter Solid Room Heater Model#:G230900 Mid Plant: I Mfg.Date: J79
The stove has a solod cast iron(looks like) door.
Was wondering if there is a door available with a "window" in it and how do I obtain one.

Lisa    Posted 05-08-2008 at 07:55:36       [Reply]  [Send Email]
I have an all nighter for sale with working blower. $500 OBO I live in Northwest corner of CT.
203-376-8191 or email me.


Jim    Posted 09-17-2008 at 03:56:22       [Reply]  [Send Email]
I am interested in your wood stove for sale.
Is this one of the "Moe" Models i.e. Big Moe, Mid Moe etc.

Gerald Richardson    Posted 05-14-2008 at 14:14:50       [Reply]  [Send Email]
where are you located and what size is the stove

Jean Marie    Posted 12-19-2008 at 13:36:11       [Reply]  [Send Email]
I have a big moe and wondering if you purchased on if you may have the UL rating

Raymond    Posted 06-26-2008 at 07:25:11       [Reply]  [Send Email]
If you haven't found a stove yet, I have an All-Nighter Stove Works Mid Mo' with hot water extraction cylinder for sale. Price is $300. Located near Springfield MA.

Jim    Posted 09-17-2008 at 03:58:35       [Reply]  [Send Email]
Hi Ray,

Still have your wood stove for sale?

I am interested.


Dennis King    Posted 08-30-2008 at 18:28:45       [Reply]  [Send Email]
Hi I have been looking high and low for an all nighter hot water coil and a copy of the operating instructions for the stove and the ciol. I would like a pictutr of the water coil or to purchase if available?? I can be reached at 860 559 7534 or at I'm just south of Hartford CT.

Thank you,

Steve Borucki    Posted 08-28-2008 at 07:53:08       [Reply]  [Send Email]
Interested in your stove especially about size(square foot it ) heats and operation.

Bill Wilson    Posted 08-30-2008 at 09:32:07       [Reply]  [Send Email]
I might be interested in this stove. let me know where I can see it.

Katie    Posted 04-09-2008 at 11:44:10       [Reply]  [Send Email]
I have an All-Nighter Big Moe. In great condition. It effectively heats my 1500 sq ft home. Complete with blower. Looking to find out how much its worth, I would like to sell it. But don't want to get ripped off lol.

trevor micoletti    Posted 07-23-2008 at 18:06:06       [Reply]  [Send Email]
is stove still for sale?

Gerald Richardson    Posted 05-14-2008 at 05:08:40       [Reply]  [Send Email]
I would be interested in purchasing your stove.what are you asking for itand where are you located Thanks Jerry 1-860-4894318

Janet    Posted 03-24-2008 at 09:22:58       [Reply]  [Send Email]
We have an All Nighter Little Moe for sale for $250. It effectively heats our 1500 sq.ft. two story house to 70 degrees, even on the coldest days. Also for sale for $250 is enough zero-clearance insulated flue piping for a two or three story house. Pick up only on the Eastern Shore of Maryland (Chestertown, MD). Call 410-639-9954.

Kim Strawson    Posted 08-18-2008 at 09:47:24       [Reply]  [Send Email]
Would you happen to have the specs for your little mo we have one and want to install but the town is looking for the specs and we cannot locate the book on this stove any help would be greatly appreciated.
Thank You,Kimberly

Penny    Posted 05-08-2008 at 10:41:21       [Reply]  [Send Email]
I have an all nighter big moe that I want to reinstall in my house I am looking for a user manual that I will gladly pay for as the town will not let me put it in with out one. Please let me know if you have one that you would be willing to copy and sell

Thank You

Ray    Posted 02-20-2008 at 05:47:10       [Reply]  [Send Email]
I have an All Nighter Big Moe and am looking for an original factory water heating jacket or "doughnut" for it. Also if someone has one they don't want to part with but would take some digitals of it in place and removed I can probably build my own. I would also be interested in any literature to do with the water heating aspect of the stove. Thanks.

Jean Marie    Posted 12-19-2008 at 13:37:31       [Reply]  [Send Email]
I was wondering if you had the UL rating on this stove

Nell    Posted 03-02-2008 at 11:07:12       [Reply]  [Send Email]
From what I learned on this website, We have a Mid Moe for sale -- has some rust, but can be polished up. Currently hooked up in the basement, but will be replaced with pellet stove (hubby tired of cutting wood for it!) It puts out a ton of heat. we're in northwest NJ if anyone is interested. Asking $450 OBO

acioci    Posted 01-29-2008 at 08:10:33       [Reply]  [Send Email]
Hello Everyone, I have a Mid Moe all nighter and I need the specs on it. Does anyone have them and could maybe e-mail or fax them to me. I'm in violation for no permit and need to show specs asap. Any help wil be greatly appreciated.

Thank you

Eric Cook    Posted 04-25-2008 at 09:20:03       [Reply]  [Send Email]
Hi!! I saw your email on the internet. I didn't know if anyone had emailed you back with any information about the mid moe. I recently purchased one and I am also looking for any information and or specs. Thanks, Eric

Jim    Posted 02-08-2008 at 11:25:35       [Reply]  [Send Email]
I have a mid moe and have noticed smoke coming from the top vent caps ( not the intake vents on the door but the silver vents on top of the stove.)

Any ideas on what causes this?

rich    Posted 08-06-2008 at 06:08:09       [Reply]  [Send Email]
You may have a hole in the interior piping that comes from the blower connection in the back.Do you have it hooked to a blower,btw?

Bernard Rock    Posted 10-23-2008 at 20:43:55       [Reply]  [Send Email]
I have a little mo that mice got into the blower hole and stored
pieces of dry dog food in the piping channel. When I fired up the
stove it smoked a lot until all of the dog food stored inside had
burned to an ash substance.

MARK    Posted 02-28-2008 at 14:23:27       [Reply]  [Send Email]
I have just aquired a large size stove. There are no marking on it other than the door which says "MOE". It's in good shape but needs some work. Can anyone help me find spec sheets so I can determine my model. Also, original / copys of instuctions and / or sales catalogs would be great. I would like to restore and use it. I also need info on the proper firebrick replacement, how the original blower was set-up and if I can get a glass door for it. ANY and ALL info would be greatly appreciated...THANKS...MARK

Tom    Posted 01-08-2008 at 12:53:32       [Reply]  [Send Email]

allnighter for sale, accepts 22" logs, blower included, $350

Bloomfield, CT

jim    Posted 01-11-2008 at 14:29:33       [Reply]  [Send Email]

tom have you sold your all nighter!!!!



amanda    Posted 11-27-2007 at 07:52:27       [Reply]  [Send Email]
I have a all nighter stove and the building inspectior cant allow me to install it if i dont find the ul number for this model. I have a mid moe model 16301. He said the number would be on the back of the stove on a plate but it does not exist. Please some one help me we were supposed to have the stove installed this weekend and with out the number i cant install it thanks

Doug    Posted 03-21-2008 at 21:37:42       [Reply]  [Send Email]
Hi i have a little Moe for sale you can reach me at 203 878-8184 thanks.

Doug    Posted 03-21-2008 at 21:34:20       [Reply]  [Send Email]
Hi i have a little Moe for sale you can reach me at 203 878-9184 thanks.

steve    Posted 12-09-2007 at 09:38:54       [Reply]  [Send Email]
I've been given a Mid- Moe and trying to hook into a 6" stove pipe.
The collar on the back of the stove measures 5-1/2" inside
diameter. Was there a piece to increase to 6"? If anyone has one
and wants to part with it let me know. Thanks, Steve

Paul    Posted 02-21-2008 at 08:36:28       [Reply]  [Send Email]
Steve, I use to own a Mid Moe and I had a creosote collector that attached to the back of the stove and you attached your stove pipe to the collector.

amanda    Posted 12-02-2007 at 17:07:02       [Reply]  [Send Email]
Hi everyone, Just me again wondering if anyone knows how to change the firebricks in a all nighter mid moe model. Please email me

Matt    Posted 12-15-2007 at 17:02:06       [Reply]  [Send Email]
Just finished refinishing an all nighter wood stove. I saved it from the trash pile someone just left it and moved away. How do you tell what model it is mine has a cast iron door with a picture of moe snoozing and two round air vents on the bottom of the door. no glass no blower no name plate. anybody got any ideas.
Thanks Matt

Dennis McPhillips    Posted 01-19-2008 at 11:59:26       [Reply]  [Send Email]
Matt.. It sounds like you have the same stove as me. I have a stamped plate on the tray that states:
UL approved
Solid Fuel Room Heater
Mod: Mid
Plant: 1
MFG: 79

I hope that helps.

amanda    Posted 12-02-2007 at 17:04:35       [Reply]  [Send Email]
Hi everyone if you are looking for a ul number for your mid moe model all nighter stove i hve one. My all nighter mid moe model stove model number 16301 . The ul number is 1482 product tested to ansi/ul 1482 by arnold green testing labratories. Any other questions please feel free to ask.

Janette    Posted 08-12-2008 at 07:27:41       [Reply]  [Send Email]
We have an All Nighter wood stove. Probably a mid moe. We are trying to find the installation requirements to figure out if we can economically install it in our home. Where did you get the information you needed for the inspector. Thanks so much.

Dennis McPhillips    Posted 01-19-2008 at 11:55:35       [Reply]  [Send Email]
Amanda. I just refurbed an All Nighter... mine has 2 intake holes. The building inspecter in my area is also looking for information on the stove. How and where did you aquire the stoves information.

adam    Posted 10-15-2007 at 08:07:22       [Reply]  [Send Email]
saw this post, ton of info.
i've got a mid moe in great shape, all bricks intact and with a
working blower. looking to sell it. have it listed for $450, located in
southern maine.

JIM    Posted 11-19-2007 at 20:50:42       [Reply]  [Send Email]


jim    Posted 10-20-2007 at 22:09:46       [Reply]  [Send Email]

do you still have your mid moe if so what town in maine thanks

Todd    Posted 10-31-2007 at 08:35:12       [Reply]  [Send Email]
Hello Everyone,

I purchased a home back in January of 2007 and it came with an All-Nighter Wood Stove that I am trying to find more information on. I have used it several times and it works well, but I'm trying to identify what model it may be? It does indicate "Moe" on the bottom of the front door, but that's it. It also has a scene of a Cabin and some fire logs and has only one air take.

The stove is located in my fireplace opening in the basement. The basement is about 1200 sq ft and the upstairs of my house (Ranch) is 1200 sq ft also. The stove heats up the lower level well, but I am really looking to get a good amount of heat upstairs as well. I am thinking the stove may be too small to heat the whole 2400 sq ft house (which is what I am looking to do). It may be that I need to buy a larger wood stove to get the results I am looking for, not sure. I am hoping to identify the model of this All-Nighter and the possible specs (BTU rating) etc. Any help would be greatly appreciated.

Chad    Posted 10-01-2007 at 05:26:49       [Reply]  [Send Email]
I have a big moe, and am looking for a copy of the complete spec sheet, installation manual, and maintenance manual that came with the stove so I can get thru the building inspection process. Can anyone help me out?

Casey Caton    Posted 12-16-2007 at 17:48:20       [Reply]  [Send Email]
Your stove is fine for your size home. What you need to do is get one or two hot loads through the stove and get the basement around 90 degrees. I would then crack an upstiars window furthest from the stairs and would open a downstairs window about 4 inches. I heat a 3 lev el home this way and it keeps all floors between 63 and 68 degrees even when its 6 degrees outside

Rick W.    Posted 12-04-2007 at 08:10:52       [Reply]  [Send Email]
With only one air intake this has to be either a tiny moe or a little moe. If the firebox measures 16" in depth, it's a tiny moe. If it measures 20" in depth, it's a little moe. Any other questions just contact me through e-mail.
Rick W.

Jay    Posted 12-06-2007 at 01:38:06       [Reply]  [Send Email]
Thats Odd,

My fathers Big Moe accepted a log at least 24" long and the door opening has got to be at least 20" square. His blower was located in the front right, 2" piping about 16" with a black squirrel cage blower 2 outlets up top. We purchased an optional coal grate back in I would say 1979-80 Inside was lined with white fire brick about an inch and a half thick and the top was 1/4 inch steel plate. After reading these posts, I'm still trying to figure out how to ebay it, but I know it did have a welded plate on the back so that should answer something. When I was a kid I remember that it got so hot you couldn't stand 2 feet from it for more then a few min, before your pants were roasting. I personally fired it up to the point the flue pipe buried the temp guage red hot, but normally we ran it 600-650 - Wicked sketchy trying to figure out BTU output, I would venture around 48K running normal 500-525 flue output. dampered it would run for a well into the next day at 450 but creasote buildup in the chim was a yearly tire chain drop.

Hank Groth    Posted 01-10-2008 at 06:15:14       [Reply]  [Send Email]
I have an All-Nighter Little Moe and would like to get my hands on one of those black squirrel cage blowers. Does anyone know where to get these blowers? They probably became obsolete. I've had my All-Nighter for about 30 years and is still going strong.

Don    Posted 01-14-2008 at 19:15:11       [Reply]  [No Email]

I have 2 of these and with some 2" flex exhaust tube they work great!!

Go to
In the advanced search put in 4C441

Regards, Don

Chad    Posted 10-22-2007 at 14:02:06       [Reply]  [Send Email]
I've learned that installing the stove in my house is not feasable for the amount of money I have to spend, thus I'm looking to sell. I have a Big Moe that used to have glass, but has since been replaced by a steel plate. The seals are good, and it heats like a champ (my parents used it for 20 + years), please give me a call if your interested.

Anthony    Posted 08-10-2008 at 05:00:55       [Reply]  [Send Email]
How does the flex exhaust tubing interface with the air tubes on the stove (Big Moe)? Thanks

sean bourbeau    Posted 09-01-2007 at 23:27:08       [Reply]  [Send Email]
well if you would like to know my father roger bourbeau made the stove you have started the allnighter wood stove co. in glastonbury ct he had the first patton on a wood stove in the u.s. he started it all in his garage behind his mothers house if you want to know more please let me know its amazing to see thing about my father nearly 30 years later pleas let me know what you think about it and i will stay in contact with you...


Ray    Posted 02-11-2009 at 11:29:10       [Reply]  [Send Email]
Even inadvertent disclosure can destroy trade secret status. For example, a sales representative for Fisher Stoves accidentally left a copy of the Fisher Stoves dealer list on the counter at the Olde Towne and Country Store, one of Fisher Stoves’ dealers. James Morande, the Olde Towne proprietor, found the dealer list and made a copy of it before returning the list to Fisher. Morande then formed All Nighter Stove Works, a Fisher Stoves competitor, and used the Fisher Stoves dealer list to solicit dealers for All Nighter’s stoves. When Fisher Stoves sued All Nighter for misappropriation of trade secrets, the Court gave no credence to Fisher Stoves’ claim, noting that “even a bona fide trade secret is not protected against discovery by fair means, including accidental disclosure.” (Fisher Stoves v. All Nighter Stove Works.)

Ted    Posted 11-18-2007 at 18:51:42       [Reply]  [Send Email]
maybe you can help me, I have a little moe all nighter # 224659 made in 1979 I am currently looking for some parts dampner knobs ect.

thanks in advance,


Penny    Posted 05-08-2008 at 10:51:41       [Reply]  [Send Email]

I was glad to see your message. I have been trying as I see many others are also to get instructions for the stove I have. It is an all nighter with Moe on the lower left hand corner and 2 intakes I would appreciate any help you could give me I am in Glastonbury quite often and would gladly pick up any info you have

Thank You

amanda    Posted 11-24-2007 at 05:11:22       [Reply]  [Send Email]
I have just bought a all nighter wood stove. Mid moe model. I got it from a guy who was selling it out of his garage. looks good but needs new bricks inside. I have the paperwork with it but dont know what to do about the bricks. What do i need? And where can i get them? I live in western massachusetts. Thanks

Ron Chiasson    Posted 12-27-2008 at 00:28:07       [Reply]  [Send Email]
Is there any way you could fax me a copy of the papers you have on the Mid-Moe? I need specs for installation. Thanks very much. Ron

nancyh    Posted 08-14-2008 at 08:04:29       [Reply]  [Send Email]
i am looking to install a mid moe soon and need the specs and installation guides for the inspector. please help.

Cindy    Posted 12-03-2007 at 16:49:35       [Reply]  [Send Email]
Hi,Ted. I was read this page & saw your reply That you have Little Moe, Thats what we have & we need information on Modle # & ul # Doyou have those? were would they be locacated on the stove? we can't find them. Could you email me back with this inforation. we need it for Building inspector also.
This would be a great help to me Thanks. Cindy

JIM    Posted 11-19-2007 at 20:37:44       [Reply]  [Send Email]



jim    Posted 10-20-2007 at 22:36:07       [Reply]  [Send Email]
if you would like to know your father is a great man but he was part of a team the names jim jack bill andyour dad roger work as a team on all of the stoves I named ALL NIGHTER STOVE WORKS INC.
sean you can contact me any time I can give you any INFO YOU WOULD LIKE TO KNOW

look up on goggle all nighter stove works inc
regards jim moe ????

larry    Posted 11-17-2007 at 12:24:38       [Reply]  [Send Email]
I am trying to get an all nighter through a building inspection in NW Conn. Were these stoves ever UL rated? Does any one have a metal placard for a little moe? All info welcomed. Thanks Larry

jim    Posted 11-19-2007 at 02:32:34       [Reply]  [Send Email]


all nighter was the first wood stove to be UL RATED back in! 1977/78

call ul for info

good luck jim

Cindy    Posted 12-03-2007 at 16:58:48       [Reply]  [Send Email]
Hi Larry, Did you ever find the information about little Moe that you were looking for we are looking for the same information for the building inspector, if you have it any information would be great that all we are waiting on now to finishing installing. we have spent a lot to get this far. So if you have it please send it on to me. Cindy.Thank you.

Don Lundberg    Posted 11-06-2007 at 10:37:15       [Reply]  [Send Email]
Hi Sean & Jim,
Why did they close down?

We have 2 "little Moes" that take 16" wood.

Thanks to your Dad's, for making Great stoves!!

Don in CT.
PS, I use to work at 99 commerce st. Small world.

jim    Posted 11-19-2007 at 03:16:24       [Reply]  [Send Email]

dec 24th 1979 time magazine all nighter stove works producing 400/500 stoves per day in usa against ademand of 1300 per day yes it is a great stove
dealers paid C.0.D
1980 pres. j morande gave credit to all dealers in usa and that was it hope you find this to be good info regards jim

stefan augsberger    Posted 10-13-2007 at 12:33:50       [Reply]  [Send Email]
i bought a house with a moe in the basement it doesn't have a
blower and i was hoping to get some help in locating one. thanks,

Kim Griffin    Posted 09-30-2007 at 18:01:46       [Reply]  [Send Email]
All Nighters are one of the best wood stoves ever made, thats a fact. I am 55 yaers old and have heated two older, 1200+ square ft. homes for @30 years with a Mid Moe. I'm prepared to feed it @4-5 chord of nice dry hickory and ash this heating season. I love our woodstove and so does the whole family.
I am trying to find a blower motor for the side attachment to the internal hot air pipes. Also I'm looking for the water jacket for the same stove.
Kim T Griffin

Mike    Posted 11-25-2007 at 15:57:06       [Reply]  [Send Email]
I stumbled on some info I was looking for also. I found that Grainger (an industrial supply mag) would have some blowers that would work in this 2" opening. Just use some automotive 2" flexable exhaust pipe to plum the blower into the stove. Mine is the same stove with an opening on the bottom right front side corner with two tubes going through the stove and out the top. I hope this helps.

Dave MacLeod    Posted 11-21-2007 at 18:27:06       [Reply]  [Send Email]
Kim - I have a water jacket that I'd be glad to swap for a blower - if you found a good source? My jacket has the old fittings in place. I had to cut off the pipes as I was in a hurry. Penetrating oil should work. My jacket fits the Big Moe but I think they're all the same. A standard 6 inch flue goes through the middle. I don't have it here to measure but could get the numbers for you within a couple of weeks.


Rick W.    Posted 02-12-2008 at 10:44:44       [Reply]  [Send Email]
Dave,Do you still have the hot water jacket? I have a blower and would be glad to swap.

PaulM    Posted 01-21-2008 at 03:16:55       [Reply]  [Send Email]

I have a original blower for your stove that I may be interested in swapping for a water jacket donut. Would you have a picture of the donut?


PaulM    Posted 01-20-2008 at 17:16:50       [Reply]  [Send Email]

I may be getting a stove that has the original blower for your stove, respond back to me and when I get it I would trade for the water jacket. I would like to see a picture of how you cut it to see if it is still useable for my application.


bruce stewart    Posted 09-24-2007 at 16:32:50       [Reply]  [Send Email]
hello, i have two all nighters. little and mid moe. i would like to find a glass door for the mid moe, are they available? would like to converse on the phone, i will pay for the call. bruce 914 636 2110 thank you!! i also have some original paperwork for this stove and will send a copy to an all nighter owner.

dan    Posted 05-19-2008 at 18:59:04       [Reply]  [Send Email]
I am looking for a water jacket for a big moe or if anyone may have a picture of one any any help would be great thanks

Ralph    Posted 10-08-2007 at 15:47:31       [Reply]  [Send Email]
Hi!Did you ever find out if you could find or if they make glass doors for you wood stove? I believe that i have the big Moe and would like a glass door for it .Please email me and let me know. Thank You!

Chad    Posted 10-15-2007 at 05:36:41       [Reply]  [Send Email]
Ralph, I too have a big Moe, and am looking for some glass, have you found anything yet? I am also looking for the original paperwork that came with the stove, you don't happen to have a copy of it do you?

jcurt    Posted 07-06-2007 at 06:13:22       [Reply]  [Send Email]
Have the All Nighter Tiny Moe in my home. Love this little stove, though it's hard to get much longer than a 15 inch piece of wood into it, partly because of the heating tubes in the back. Seems very efficient and plenty of heat for a 1000 foot house in Michigan. Original blower still works and kicks out a few extra BTU's when needed. It is still air-tight, but would like to replace door gaskets before winter and would very much appreciate any experiences in this regard you can share. Don't know best way to remove the old gasket or what size to buy. Am wondering how difficult it would be to remove the door (held on by 2 large pins) so a pro could install new gasket. We had a choice of Big Moe, Little Moe or Tiny Moe in the 80's. Salesman suggested Tiny Moe for our needs and have been very happy with the stove. Did replace the bricks once. Any information would be appreciated. Would love to contact manufacturer for info but don't think they are still around. Thanks

rosa    Posted 11-27-2008 at 12:42:26       [Reply]  [Send Email]
I had no problem to remove the door .
I would like to replace the door for one with glass dont knoww where

Harold Karlsvik    Posted 08-16-2007 at 13:40:44       [Reply]  [Send Email]
I recently moved into an older home with an "All Nighter" stove in the basement. I don't want to deal with firewood so I want to sell it.

I have no idea what model it is. It has an electric blower on the back and is connected to the house's furnace ducts.

On the inside, on the left, the letters "FJO" ( I think) are inscribed on the brick.

Can anybody help?

Dean Greenwalt    Posted 09-28-2007 at 12:41:06       [Reply]  [Send Email]
Is your stove still available? If so, where are you located?


ralph    Posted 10-24-2007 at 18:50:35       [Reply]  [Send Email]
I have a big Moe that I am trying to sell,it has the blower .It is in great shape,works great but its to big .Asking $500.00 OR BEST OFFER.

Tim Gosselin    Posted 06-24-2008 at 16:06:53       [Reply]  [Send Email]
Still want to sell a wood stove?? Looking for the Big Moe, if not aval. do you know of others in the State of Maine??


Alan Bowen    Posted 09-05-2007 at 09:08:20       [Reply]  [Send Email]
Where are you located, Harold?
How long is the firebox from front to back?

ralph    Posted 10-24-2007 at 18:53:12       [Reply]  [Send Email]
I have a big Moe that I am trying to sell.It has the blower to.It works and looks great.I am asking $500.00 or best offer.

GENE    Posted 08-09-2006 at 16:29:01       [Reply]  [Send Email]

dan healey    Posted 02-21-2008 at 16:25:49       [Reply]  [Send Email]
im interested in your wood stove an would like to pick it up iam in ny is the stove in good shape you can call me at 1518 496 5287

Richard Rhodes    Posted 11-10-2003 at 05:55:40       [Reply]  [Send Email]
I have recently removed this same stove from my parents basement. They happened to have some of the original paperwork.

All Nighter Stove Works West Inc.
P.O. Box 1858
Richmond, Indiana 47374
(317) 962-0511

I am also still unable to locate this company. AT&T information provided the new 765 area code listed above, but still no luck. Please let me know if you locate anything yourself as I need a few parts.


Christy    Posted 11-02-2006 at 09:03:31       [Reply]  [Send Email]
All Nighter Stove Works Inc
80 Commerce Street
Glastonbury CT 06033

203-633-3640 or 203-633-3649

Mike    Posted 12-09-2003 at 15:00:06       [Reply]  [Send Email]
I am looking to heat a huge 12ooo sq ft. building with gas but would like to supplement it with a wood stove. A friend reccommended the all nighter anyone have any thoughts on the matter please share.

tim    Posted 11-08-2003 at 13:16:43       [Reply]  [Send Email]
hello Aquacanis,i was researching the All-nighter stove company when i read your article. i to have aquired one of their stoves and have no info on it. i am in the process of hooking it up in my garage for heat when i need it this winter.the stove has no info on it except that is has the "all-nighter emplem with a cabin and trees on the solid is an air tight steel box with the top being flat except for a third center section that is on a 45 degree angle where two blower holes r mounted. do you have any info on the company or anything you would like to share with me ?

Troy Lawrence    Posted 10-04-2003 at 05:13:32       [Reply]  [Send Email]
I have recently boughten a home that came with a wood stove in the basement. The only markings on the stove were on the door. "All Nighter" with pictures of pine trees in the background. There is also the raised name "MOE" on the lower part of the door. It has a serial plate, but from what I can remember, no real info on it. It is lined with firebricks on the side and bottom. Can you tell me what you have learned about these types of stoves? I will most likely be looking to sell it.



shawn    Posted 08-10-2007 at 15:58:54       [Reply]  [Send Email]
I have the same exact wood stove as you. Cabin and trees in front, two blower holes and also has the 45 degree angle

kathleen Kaler    Posted 08-28-2004 at 18:45:47       [Reply]  [Send Email]
We had one of these in my home when I was growing up. It produced many BTU's, it was a great heat source!

Andy    Posted 02-15-2004 at 12:38:32       [Reply]  [Send Email]
Hello all. These stoves are excellent! There was atleast 5 models manufactured, possibly 6; but cannot find proof the 6th model was ever manufactured. Giant, Big, Mid, Little, and Tiny Moe's were all built. The stoves were available with several options including a water jacket in the rear to heat domestic water. Giant Mo' had the glass door and was wider than the others. The 6th model, was going to be the Jumbo of which I have no information on. Not sure if it was ever produced though on an original pamphlet my Father has it says 'coming soon'. Don't know what year the pamphlet is from but he guesses around 1976.
Have a Home Office address in a Directory from 1979: 80 Commerce Street, Glastonbury, CT 06033. Phone Number: 203-659-0344 area code is now 860 but I have not tried calling this number. Have another address in Directory: Falcon Marketing International, PO Box 4567, Santa Rosa, CA 95401 Phone No: 707-525-8766. Have fun with above info. I actually just bought a 'Tiny Mo' and my parents have a 'Mid Mo'.

Don Lundberg    Posted 01-08-2004 at 07:26:20       [Reply]  [Send Email]
These were made in Glastonbury CT. 3 sizes were available that I know of, "Little" Moe ,"Mid" Moe, "Giant" Moe. We have 2 little Moes 12" sq. door and about 24"x16"x16". One has the blower inlet in the rear and the other has the inlet on the Right side toward the front. I'm looking to find the reason why they changed. The rear inlet stove seems to work much better.
They went out of business before 1991.

Troy, Are you in New England? If so how much do you want for the stove!

Regards, Don

J Green    Posted 12-03-2005 at 17:36:23       [Reply]  [Send Email]
Jule I found this info

GREG    Posted 11-02-2005 at 18:56:13       [Reply]  [Send Email]
I have the All Nighter Moe and am looking to sell it. I believe it is the Giant Moe. H 31" x W21 1/2 x 33L It has the ports in the rear. In great shape just needs some replacement bricks. Anyone interested?

bruce    Posted 08-30-2007 at 14:32:46       [Reply]  [Send Email]
dear greg, i have the small all nighter, but it isn't large enoughto give the heat i need. can you call me,leave your number if machine comes on. either way i will pay for the call. i am totally ackward with the computer. thanks bruce
914 636 2110 yes i am interested in buying your stove.

Nelson    Posted 12-11-2005 at 14:37:36       [Reply]  [Send Email]
Greg I'm interested in the Giant Moe let me know how much and do you have pics?

Kevin    Posted 12-20-2005 at 17:09:58       [Reply]  [Send Email]
I am looking for an All Nighter wood stove.I live in CT. and will have no problem picking stove up.

PATRICIA MELIA    Posted 03-24-2008 at 12:18:24       [Reply]  [No Email]

Tom    Posted 04-05-2008 at 12:55:37       [Reply]  [Send Email]
I have a Chubby Moe in great condition that I'd like to sell. We used it with coal for several years, then wood. There's no one home during the day so I'm hoping to replace it with a wood pellet stove that will feed itself. Location is SE New Hampshire. Price...?

Dennis    Posted 08-29-2008 at 15:48:29       [Reply]  [Send Email]
I wood love to see a pic of the chuby.

Butch    Posted 11-26-2005 at 19:38:00       [Reply]  [Send Email]
I'm in Ct.I may be interested in your stove if you live close enough
Thanks Butch

Rick    Posted 11-17-2005 at 17:04:39       [Reply]  [Send Email]
I am looking for a mid or a giant moe. I am on ebay but am constantly losing bids. I guess I'm not that good at auctions yet. I would love to know if you sold the stove yet.

Brian    Posted 05-13-2004 at 03:31:50       [Reply]  [Send Email]
I have been lurking on this forum to learn more about my "All Nighter" woodstove. We are remodeling our basement and wish to sell it. I believe I have the mid-Moe, as the box is about 24 inches long and it accepts 22 inch logs. It was here when we bought the house, but it is way too big for our basement. It's in perfect condition, with a blower on the side. We live in northern New England.

Carl    Posted 09-30-2004 at 14:46:35       [Reply]  [Send Email]
Do you still have your stove. Just got one too. Do you have any paperwork on it. Need info for town permit before installation

Bill Sumner    Posted 11-26-2006 at 08:59:45       [Reply]  [Send Email]
do you still have your stove? and if so how much for it?

Lori    Posted 12-28-2006 at 16:30:34       [Reply]  [Send Email]
I have an all-nighter moe model with original paperwork and blower unit. Want to sell,
would need to be picked up hudson valley NY.
Very good condition.
Heated amazingly well very large downstairs of house and warmed the upstairs.

Bill Austin    Posted 10-17-2005 at 16:37:20       [Reply]  [Send Email]
looking for paperwork for the MOE Allnighter just picked one up out of someones basement looks to be in good shape.. Would appreciate any info!

Robert    Posted 11-18-2008 at 10:56:38       [Reply]  [Send Email]
Hello, to anyone out there in All Nighter Land. I recently purchased a Mid Moe, Model #16301, UL# 1482 (I obtained the model and UL from another on this site and if correct, Thank you!). I desparately need mfg's. instructions and Specification documents if any one out there can help I would be extremely grateful.

Robert of Maine

Heidi    Posted 11-14-2007 at 10:57:07       [Reply]  [Send Email]
I am looking for paper work on the same model.
also looking for a blower rear mount

les the painter    Posted 11-15-2005 at 12:27:22       [Reply]  [Send Email]
yes, mr. austin, e-bay has the original paper work for the 4 models made, installation papers consist of 12 pages, good luck

jon    Posted 12-02-2004 at 13:15:21       [Reply]  [Send Email]
I also have an "all Nighter" in my basement. It was installed in 1980, and still heats my home, 24'x 42', basement and main floor down to 30 below and at 70 deg. At the colder temps. I have to fill it 4 times a day, depending on the hardness of the wood, usually only 3. I have what I believe is all the factory paper work on it.The paper work has three[3] different adresses. anyone wanting copies or info "mail" me at the above. This is a great wood stove.

Steve Buzzell    Posted 03-01-2009 at 19:13:03       [Reply]  [Send Email]
I just bought a Big Moe All Nighter. If you can email written into it would be great. Thanks. 518-891-1000 or call collect.

John    Posted 09-17-2008 at 12:31:43       [Reply]  [Send Email]
I just purchased a big moe allnighter and was wondering if your offer for sending the information out still stands. Thanks for any help you give me.


Paul McMahon    Posted 10-23-2006 at 19:02:56       [Reply]  [Send Email]
I have just bought a house and it has an All Nighter 99. I'm just trying to get more information on it. If you have any info or can point me in the direction of finding info, I would really appreciate it. Thanks.

Manny    Posted 12-29-2006 at 07:26:11       [Reply]  [Send Email]
This site contains spec sheet for the Allnighter

Daniel A. Santoro Jr    Posted 03-05-2006 at 09:43:09       [Reply]  [Send Email]
hi, I have a big moe and looking for paper-work for this stove. I understand you have it can I get a copy from you?

trent    Posted 02-09-2005 at 12:25:47       [Reply]  [Send Email]
I would like to take you up on your offer for copies of paperwork. We just received the 'big' model from my father-in-law, new, never installed, but lacking any papers. According to the id plate, this stove was manufactured in '79, at "plant I". Appreciate the help.

Craig    Posted 06-20-2005 at 08:21:58       [Reply]  [Send Email]
We just bought a home in Western Mass that has a wood burning stove (All Nighter) in the basement. It took up a large part of the basement, so we are temporarily storing it in the garage til we can sell it. The measurements (not including the wheels that the stove is on) are about 26" long x 21.5 wide x 27 high. The door opening is about 11 x 12. It says MOE on the front. It was manufactured in 80 at Plant I in CT. I would also be interested in getting paperwork on it so it would be easier to sell. Thanks for your help.

Bill    Posted 04-09-2004 at 08:14:59       [Reply]  [Send Email]
I just bought a house with an All-Nighter stove in what appears to be perfect condition. The previous owner was a single mom who was afraid of it, and said she only used it once in twenty years. From the looks of it, I believe her. I believe it's the "mid-moe" model.

The stove is too big for my family room, and my allergies prevent me from using it, but I know it's a great stove, and I'd like to find a buyer for it. I live in Connecticut, just south of Hartford (right near Glastonbury, in fact!).

Drop me a line at if you're interested. The buyer would need to arrange pick-up; it's big & heavy!

Bill    Posted 04-09-2004 at 08:14:59       [Reply]  [No Email]

Titus Kirby    Posted 11-04-2007 at 07:04:42       [Reply]  [Send Email]
manuductory chilly sacrolumbar opiliaceous pig undetermined amid unauspiciously
Stainless Steel Anchor Winch

Quintin Becker    Posted 11-03-2007 at 03:32:25       [Reply]  [Send Email]
manuductory chilly sacrolumbar opiliaceous pig undetermined amid unauspiciously
Vb Code

Quintin Becker    Posted 11-03-2007 at 03:32:25       [Reply]  [No Email]

Leona Vang    Posted 10-15-2007 at 12:37:50       [Reply]  [Send Email]
manuductory chilly sacrolumbar opiliaceous pig undetermined amid unauspiciously
Saigon Village

joe    Posted 10-25-2007 at 13:47:56       [Reply]  [Send Email]
I am interested in the stove. what is the price? can you post a picture of it. thank you. please reply either way .

joe    Posted 10-25-2007 at 13:42:20       [Reply]  [Send Email]
I am interested in the stove. what is the price? can you post a picture of it. thank you. please reply either way .

jim    Posted 10-21-2007 at 14:43:19       [Reply]  [Send Email]


I would like to buy stove If the price is right

please send me your price by e-mail

thanks JIM

$$$$ ???

dave boor    Posted 05-21-2006 at 17:49:50       [Reply]  [Send Email]
if you still have it i would be interested. call dave at 860-349-1902

Marisa    Posted 11-03-2004 at 16:50:38       [Reply]  [Send Email]
Hello - Wondering if anyone out there has the specs or paperwork on the 'Tiny Moe'. We need it for the city permit before installation is possible. Any help would be greatly appreciated!!

Thanks in advance,

Troy Lawrence    Posted 01-08-2004 at 17:42:10       [Reply]  [Send Email]
nope, Wisconsin. Mine has the inlet in the rear of the stove. I believe it said it was a Big Moe. I may just set it up in the garage. Need to check with insurance and building codes and all. thx for the info.


Don    Posted 01-10-2004 at 13:29:44       [Reply]  [Send Email]
Here they will not let you use a wood stove in a garage. Our house is 22' x 60' Ranch and we have one at each end. We are averaging 1/2 cord a week. The oil furnace only runs for hot water. Glad you decided to keep it. Don

Christy    Posted 01-26-2004 at 17:08:02       [Reply]  [Send Email]
I have an All Nighter as well and am looking for a blower to attached to the back of the stove that goes into the pipes. I must have the Big Moe! as it is huge and heats my whole house 28x50 ranch basement and upstairs. Are any of you able to help me in finding a blower for this model. My dad and I have been thinking of rigging one up, but all of the ones we have talked are too loud. I'd like a quiet blower. Any suggestions?? Thanks for the help!

butch    Posted 11-26-2005 at 19:44:00       [Reply]  [Send Email]
Hi the blowers can be purchased at Graingers in theyre store or catolog

Don    Posted 01-29-2004 at 08:22:33       [Reply]  [No Email]
Hello Christy,
Go to
In the advanced search put in 4C441.
This is the blower we have on both of our's. It's about as load as a hair dryer on low. You will need to add switch and wire to plug it in. Also an auto parts store should have flexable pipe for car exhaust that works great.
Our "Little Moe's" take 16" logs the "Mid Moe" take 22" logs. I'm not sure about the "Big Moe".

Good luck, Don

Kevin    Posted 10-26-2007 at 04:38:36       [Reply]  [Send Email]
I just installed the Big Moe all-nighter in my home. The stove is same as new condition all it needed was a coat of paint and I welded a short elbow to get rid of the blower pipe and made a cradle for the blower to set in so I have a 2 inch elbow from blower to stove. Still too warm to fire it yet but looking forward to cold weather now. The best part about this is that Big Moe was GIVEN to me from my uncle and all I had to do was go get it.

BUTCH    Posted 10-28-2007 at 14:38:43       [Reply]  [No Email]
I have a mid moe in good shape with blower made in 1978, cast front door.. this thing throws some serious heat.. it easily heats my 1200 ft. house with a few logs.. its for sale. i live in western new york south of buffalo.. $450 best offer.. email me for pics..

BUTCH    Posted 10-28-2007 at 14:41:34       [Reply]  [Send Email]

ske    Posted 10-29-2007 at 07:44:07       [Reply]  [No Email]
i have what i think is a mid moe (i'm checking to make sure) very good condition asking 550.00. can e-mail pictures if interested. located in petokey mi

ske    Posted 10-29-2007 at 08:17:35       [Reply]  [No Email]
i double checked, it's a big moe

Jay    Posted 12-02-2007 at 14:38:42       [Reply]  [Send Email]
I have a newly refurbished big Moe that I would like to sell for $500.00. Please e-mail me for pictures or with any questions. The only reason I am selling it is because the chimney in my home was built for a 6" system and these stoves have an 8" outlet. Otherwise the stove heats excellent!

Thanks Jay

dan healey    Posted 03-01-2008 at 14:19:54       [Reply]  [Send Email]
do you still have the stove for sale an where are you not to far i hope

mike    Posted 01-24-2008 at 16:04:09       [Reply]  [Send Email]
I'm looking for a big moe, where are you located?

Gerald Caryl    Posted 01-06-2008 at 05:41:06       [Reply]  [Send Email]
Hey buddy,, The stove does take a 6 inch pipe,,, the 8 inch section is for a domestic hot water coil for your water heater. Notice you can not see into the stove on the 8 inch part. I have the drawings and info on how it works if needed.

Tom    Posted 01-08-2008 at 12:51:31       [Reply]  [Send Email]

I have an allnighter woodstove for sale $350, I think it's a mid moe, it can hold 22" logs, so the measurement from the back wall to just before the door opening is 22"

Bloomfield, CT

Beverly    Posted 09-22-2008 at 18:17:27       [Reply]  [Send Email]
You have info on this stove??? I know this was an old post but I'm buying I believe a Mid Moe and they do not have any manuals or specs... If you get this please email me with info attachment of your drawings at

Thank you

dan healey    Posted 02-21-2008 at 16:15:38       [Reply]  [Send Email]
im interested in the wood stove an would like to pick it up is the stove in good shape an readey to use an is there a blower with it you can call me at 1518 496 5287 kevin thanks

Michael Woodward    Posted 03-04-2008 at 16:46:37       [Reply]  [Send Email]
For anyone that is interested, There is an All Nighter 'Giant Jumbo' it has a single blower that still works and is back vented. Currently listed on E-bay (with picture). I am the one selling it so if you have any questions about it just let me know.

[Return to Topics]

[Home] [Search]

Copyright © 1999-2013
All Rights Reserved
A Country Living Resource and Community