Country Living
Country Living, Country Skills
Country People

KountryLife.com - A Country Living Resource and Community
Community
Message Board
Country Topics
Trading Post
Memory Lane
Country Skills
Country Cooking

Channels
Gardening
Livestock
The Kitchen
Machinery
Tools

Photographs
Photo Gallery
Vintage Photos
Special Collections

Fun
Country Humor
Country Sounds
Coloring Book
Interactive Story

Farm Tractors
Pictures
Tractor Parts
Tractor Manuals

Miscellaneous
Classic Trucks
Antique Tractors
Modern Tractors
Site Map
Links Page
Contact Us

  
Country Discussion Topics
To add your comments to this topic, click on one of the 'Reply' links below.

Need a source for Sachs Dolmar chainsaw parts
[Return to Topics]

Mike D.    Posted 07-02-2002 at 03:50:58       [Reply]  [Send Email]
Does anyone out there know of a good parts source for Sachs Dolmar saws? Got a 117 that needs the bar studs changed out and maybe a clutch. Looked on the net but came up empty handed.


john    Posted 08-28-2009 at 17:30:53       [Reply]  [No Email]
need a clutch for a sachs dolmar 113 no luck yet


jim    Posted 08-30-2009 at 14:03:53       [Reply]  [Send Email]
try edgeandengine.com


Wayne Chupp Nappanee In    Posted 08-17-2009 at 11:25:10       [Reply]  [Send Email]
Need to find a dealer in the nappanee in area


Gerry    Posted 05-03-2009 at 12:36:52       [Reply]  [Send Email]
I have a Sachs Dolmar 117, it needs ignition and points. I'm willing to sell it for parts.


obringer    Posted 04-23-2009 at 08:49:39       [Reply]  [Send Email]
need side cover for clutch serial number 93 675 160


Jacob Bennett    Posted 04-06-2009 at 05:02:06       [Reply]  [Send Email]
I need an electronic ignition for a Sachs Dolmar 119!!! It has 2 coils and a plastic poured in center pieces


Bob    Posted 04-07-2009 at 08:04:11       [Reply]  [Send Email]
I'm also looking for parts for my SD 123.I'm looking for a muffler ,air filter and a starting modual(magneto) if anyone knows a source please let me know.


Jack De Groot    Posted 02-19-2009 at 10:33:52       [Reply]  [Send Email]
Need electrical parts for Sachs Dolmar 112


NIGEL    Posted 03-17-2009 at 00:53:19       [Reply]  [Send Email]
i need an ignition coil for a sachs dolmar 309 please


kenny tipton    Posted 02-23-2009 at 11:18:35       [Reply]  [Send Email]
I need a dealer in the United States. I'm not sure how old the saw is, I would guess it is less than 10 yrs old. if anyone has information for me I would appreciate it. Ken


Joe_Devlaeminck    Posted 01-22-2009 at 08:49:13       [Reply]  [Send Email]
I'm looking for a sprocket guard for a 105 chain saw


F Gentry    Posted 12-23-2008 at 11:56:56       [Reply]  [Send Email]
I have two 112's . one is complete and the other is in a box.


Curt Coltharp    Posted 02-12-2009 at 12:43:09       [Reply]  [Send Email]
I am working on a 112 and I need a fuel grommet.
Please contact me if you have a good one that you would part with.
Curt Coltharp--Glascock Equipment


glen w russell jr    Posted 04-06-2009 at 14:56:48       [Reply]  [No Email]
how much do you waat for the saws


Tommy Jones    Posted 04-04-2009 at 06:43:07       [Reply]  [Send Email]
I buy my Sachs Dolmar parts at LANDCASTER'S SUPPLY in Batesville AR. the phone # 870 251 3662 he is the only dealer that i no of i bought the last parts for my 112 from him hope this will help you.


Howard Moss    Posted 02-10-2009 at 06:20:07       [Reply]  [Send Email]
I'm looking for a couple of spares for a 112. Any chance you would want to get rid of either of yours?


Brian    Posted 12-02-2008 at 15:21:25       [Reply]  [Send Email]
I need parts for my 112 sachs dolmar chain saw. reply if you know where I can get these:
A tree fell on mine but it still runs great. Just need handle grip bar, 2 fins broken off and 3 below are bent down on the cylinder head and plastic cylinder cover & brake lever & hand guard.


frankie gentry    Posted 12-23-2008 at 11:52:48       [Reply]  [Send Email]
I have 2 112 . one is complete and one is for parts.(it was disassembled and thrown in a box) I may can help you out.


Brian Stotz    Posted 01-22-2009 at 06:49:38       [Reply]  [Send Email]
Frankie Gentry: please e-mail me with your price on your sachs dolmar 112, you can e-mail me at: Stotz@williams-net.com
I would be interested in both saws if they are still available.
Brian


Brian    Posted 12-24-2008 at 06:32:48       [Reply]  [Send Email]
Frankie: I am interested in both saws. Give me a price for each or both togather.
You can call me weekdays 8am to 6pm at 1-800-881-2114 or e-mail me: stotz@williams-net.com
Thanks! Brian


Russ    Posted 10-31-2008 at 08:49:15       [Reply]  [Send Email]
I have some parts for DOLMAR chainsaws in stock and if I don't and they are still available from DOLMAR I can get them for you. 1-866-458-4104


Louis A Tidmore    Posted 11-14-2008 at 12:32:09       [Reply]  [Send Email]
I need a coil for a sach-dolmar 100 45M6 (UL)
Coil # appears to be CE 90/8


Loyal May    Posted 08-28-2008 at 13:12:06       [Reply]  [Send Email]
Need parts for this great saw.
Thanks


Charles Kidd    Posted 08-20-2008 at 09:51:38       [Reply]  [Send Email]
Need a chain (16") for SD 105. Is there a cross ref. of another brand? May also need bar for same.


Russ    Posted 10-31-2008 at 08:44:47       [Reply]  [Send Email]
I can help you with DOLMAR Parts.
1-866-458-4104


Jim Grilz    Posted 06-10-2008 at 08:45:27       [Reply]  [Send Email]
Need to know where to get front motor moknts for a 120 sachs Dolmar chain saw


greg huebner    Posted 02-20-2008 at 06:14:45       [Reply]  [Send Email]
looking for dealers to buy parts from in wisconsin or anywhere I can get them


Florence Power Equipment    Posted 02-21-2008 at 08:06:06       [Reply]  [Send Email]
I am a new dealer for Dolmar power equipment. Let me know what you need I may e able to get you what you need. I am located in north east Wisconsin. 715-528-4439


alan palmer    Posted 03-21-2008 at 10:59:37       [Reply]  [Send Email]
is it possible to find new rings,piston,etc. for a 120 super sachs dolmar,
there is not enough compression to keep it running,

willing to purchase a parts saw.

alan palmer


bob nisbet    Posted 06-24-2009 at 11:27:23       [Reply]  [Send Email]
Coil assy for Dolmar Sachs 100 ? b.


Danny    Posted 02-19-2008 at 10:30:44       [Reply]  [Send Email]
looking for parts for a sachs dolmar 133-143-153-163 Or I may sale my saw for the right price it runs great
call danny at 530-237-7866


wayne    Posted 10-12-2008 at 19:42:20       [Reply]  [No Email]
would be interested in the 133 if the price is right! which is ????? thanks


bill beck    Posted 02-19-2008 at 10:26:09       [Reply]  [Send Email]
Looking for parts for a 133-143-153-163 spring mounts and other parts
Or I may sale this 133 that runs great


Russ    Posted 03-26-2008 at 12:47:17       [Reply]  [Send Email]
Parts are still available. Go to www.dolmarchainsawparts.com


Ralph    Posted 06-17-2008 at 03:49:34       [Reply]  [Send Email]
I need to buy an ignition for a 133. I'd take the whole saw if the price was right. Email me.
Thanks,
Ralph


Adam    Posted 02-04-2008 at 19:41:40       [Reply]  [Send Email]
I am a Dolmar Dealer and can supply everyone with parts. 704 289-3586 -Adam- or Morrison


Russ    Posted 03-26-2008 at 12:46:17       [Reply]  [Send Email]
Go to www.dolmarchainsawparts.com


V. Ralph Bloomquist    Posted 04-01-2009 at 14:28:14       [Reply]  [Send Email]
I need a magneto, or ignition, or whatever the double black thing is on my Sachs Dolmar 133; it is shot. The numbers on the part include 12394, 142, and 2207031154. I've been told that there were two mags for that saw.
Thanks,
Ralph


Len Gibson BA2 7FZ (Bath)    Posted 02-08-2008 at 02:33:42       [Reply]  [Send Email]
How can I get an instruction manual, please?


Dennis H. Gross    Posted 02-02-2008 at 09:01:32       [Reply]  [Send Email]
I need a drum sprocket for a model 108 model number 048748. How much and can you supply the part.

Dennis H. Gross


Nick Mulcahy    Posted 02-03-2008 at 12:13:01       [Reply]  [Send Email]
Hi Dennis, Give Leigh Ware a try at leew@adelpia.net I have found him really helpful with parts for my 112 and 116si. He actually answers emails which is something that a lot of other dealers won't do. If he doesn't have parts in stock he will try and get them for you.........Nick.


Ray Snover    Posted 12-15-2007 at 06:18:15       [Reply]  [Send Email]
Sears has parts for all chainsaws. I think this is the phone number 1/800/366/7278


john mullins    Posted 10-17-2007 at 12:27:48       [Reply]  [Send Email]
looking for ignition parts for a Dolmar 123 chainsaw


Bob hitchen    Posted 12-06-2007 at 15:51:35       [Reply]  [Send Email]
Hi there we need a chain drive gear and a chain for a 116si dolmar chainsaw, it is fitted with an 18 inch bar.


GEORGE COOPER    Posted 11-26-2007 at 12:57:33       [Reply]  [No Email]
I CANNOT RECEIVE E-MAILS AT WORK - PLEASE NOTIFY ME AT 773 RIVERBEND RD. GOLDSBORO, N.C. 27530


George Cooper    Posted 04-14-2008 at 05:11:10       [Reply]  [Send Email]
we need a gas cap and and oil cap for a sachs-dolmar 113 chain saw


toopy    Posted 09-19-2007 at 16:41:55       [Reply]  [No Email]
TRY E,S EQUIPMENET PHONE # 1 401 884 2490 EAST GREENWICH RI 02818 DOLMAR DEALER


chris    Posted 03-13-2007 at 00:23:31       [Reply]  [Send Email]
hi I need a ignition coil or solid state for a dolmar chainsaw.
I live in Australia.can you help
p.s sp-9000 dolmar
readers Chris


chris    Posted 04-28-2007 at 00:39:39       [Reply]  [Send Email]
need a oilpump for a 143 sachs i am in trenton n. c.


JOHN RASMUSSEN    Posted 11-08-2006 at 16:48:43       [Reply]  [Send Email]
I am looking for an ignition module for a Dolmar model 153.Does anyone know of a supplier?


Neofytos Panayi    Posted 12-17-2006 at 04:36:02       [Reply]  [Send Email]
Drar sirs,
I wiil be very pleased if I have a catalogue of what parts of Sachs-Dolmar-Makita chainsaw spare parts you can provite me.
I can inform you that I have a Firm for repairing theese chainsaws in Limassol, Cyprus.

Thanks
NEOFYTOS PANAYI
n.panayi@cytanet.com.cy


Russ    Posted 03-26-2008 at 12:45:10       [Reply]  [Send Email]
Try www.dolmarchainsawparts.com


Al J    Posted 12-29-2006 at 05:11:27       [Reply]  [No Email]
Found this site this AM. Hope it helps
http://vecignitions.trustpass.alibaba.com/product/11284839/Ignition_Module_Dv_110_Replace_For_Dollmar.html


vince    Posted 10-14-2006 at 16:25:35       [Reply]  [Send Email]
Check out www.yetmans.mb.ca/manufacturers.html


graham white    Posted 09-24-2006 at 11:06:14       [Reply]  [Send Email]
i am looking for o source of spare parts to suit a DOLMAR CT, this is an early 70s model. can anybody help? thanks graham.


JOHN PIERPONT    Posted 06-21-2006 at 19:05:36       [Reply]  [Send Email]
HAVE A SACHS DOLMAR 120 SI CHAINSAW LOOKING FOR PARTS & PRICES FOR THIS SAW THANKS J.P.


Roger Harcourt    Posted 12-19-2005 at 16:06:48       [Reply]  [Send Email]
Looking for a Edmonton, Alberta Canada Location for Sachs Dolmar chainsaw parts.


russ lind    Posted 05-20-2005 at 14:55:55       [Reply]  [Send Email]
116 SI
116-051626
Top cover air cleaner
key for flywheel


johan vd wielen    Posted 08-15-2004 at 10:47:31       [Reply]  [Send Email]
hello.

if you still needs dolmar parts let me know.
i repair\sell dolmar .
there are planty parts overhere in holland.
thanks johan.


Chris Bowring    Posted 02-23-2007 at 07:26:38       [Reply]  [Send Email]
wanted For sachs dolmar 112 Right hand side cover preferly complete chain break parts also spring for pull start iam in southern Ireland can u help


B. Carroll    Posted 01-02-2007 at 14:38:53       [Reply]  [Send Email]
i need an air filter for a dolmar 117. Do you have one? how much is it and how much would it cost to ship to the roanoke area of virginia, usa?


Eddie    Posted 01-19-2006 at 10:17:07       [Reply]  [Send Email]
Hi have just found your site. I'm looking for the electronic ignition for a Sachs dolmar 100. Can you help. I'm in UK


tracy sunderland    Posted 09-04-2009 at 14:49:09       [Reply]  [Send Email]
I am looking for vibration dampeners and a gasket for the gas tank on a model 114. will be greatful for any help. thank you


Adam Noble    Posted 07-16-2006 at 11:53:24       [Reply]  [Send Email]
Could anyone provide me with a copy of the manual for a Sachs-Dolmar 105 gasoline chainsaw? Alternatively, does anyone know where I can locate one. I am in England.

Many thanks,

Adam.


Matt Harridge    Posted 06-30-2005 at 10:05:29       [Reply]  [Send Email]
Can anyone help me. I am trying to find an exhaust for a sachs-dolmar 166. Alternatively, does anyone know if a similar exhaust would fit this model.

Cheers.


R. Kyle    Posted 11-20-2005 at 19:17:27       [Reply]  [Send Email]
Do you have parts for a Sachs-Dolmar 114 saw?
1. standard piston with ring
2. standard cylinder
3. carb. gasket kit
4. cylinder base gasket

Please let me know the cost, including shipping
to Seattle, Washington, USA

Thanks for any help.


Joseph Henriques    Posted 10-02-2005 at 07:03:07       [Reply]  [Send Email]
I need a handle that has the gas triger on it for a sachs-dolmar 127 Where can I buy one, It can be used. Thank you .Joe


Leo McLaughlin    Posted 05-27-2004 at 16:51:25       [Reply]  [Send Email]
Need a source for parts for a sachs dolmar chain saw


Melvin Fletcher    Posted 10-16-2007 at 20:18:41       [Reply]  [Send Email]
homelikeness thiobacteriales absquatulate arcuation monaulos brachygraphical euhemeristically syncranterian
Eastern Massasauga Rattlesnake
http://www.amtda.org


darris dixon    Posted 01-04-2005 at 16:17:35       [Reply]  [Send Email]
i need a gas cap for a sachs-dolmar 115 chainsaw


Howard Shirk    Posted 06-08-2004 at 10:23:16       [Reply]  [Send Email]
I have found four sources for Sachs Dolmar. Since they are no longer manufacturing, the sources may run out. The one with most extensive inventory is:

Oei-A Carswell CO
2404 Mount Zion Road
Greenwood, AR 72936
479-996-6844

It has no Internet address.
------------------------------------
The second is http://www.mfgsupply.com/m/c/index.html
------------------------------------
The third is an Ebay source and may not be available. I have emailed for a business address:

http://cgi6.ebay.com/ws/eBayISAPI.dll?ViewSellersOtherItems&userid=flintstone1953&include=0&since=-1&sort=3&rows=50
--------------------------------------
Here is an Ebay store:
http://stores.ebay.com/Daves-Emporium-and-Just-PlainStuff_W0QQsspagenameZl2QQtZkm



Alberto Guerrero    Posted 10-16-2007 at 08:17:13       [Reply]  [Send Email]
commensurate hotchpotch cosmicality toscanite lurdanism tantalean unadverseness harmony
Official Connor Site
http://www.barflies.net/


Art Ellingwood    Posted 03-11-2004 at 09:11:36       [Reply]  [Send Email]

Does anyone know where in Northern Virginia I can have a Sachs Dolmar Mod 109 repired.


Neil Middleton    Posted 10-16-2007 at 17:31:55       [Reply]  [Send Email]
wyson elbowboard antra interpledge hinderfully aftercomer antiprelatic autodiagnostic
Alachua County, Code of Ordinances
http://www.geocities.com/loxfiles/


Art Ellingwood    Posted 03-11-2004 at 09:06:56       [Reply]  [Send Email]
Does anyone know where I can have a sachs Dolman Mod 109 repaired in Northern Virginia?


Art Ellingwood    Posted 03-11-2004 at 09:06:56       [Reply]  [No Email]


Glynis Shaffer    Posted 11-04-2007 at 06:29:13       [Reply]  [Send Email]
churm cinnabar jackboy africanization garlic revigorate frequent undelayed
Boston Subway System
http://www.angelfire.com/hdslbzt/ftk.html


Glynis Shaffer    Posted 11-04-2007 at 06:29:13       [Reply]  [No Email]


Roxann Osborne    Posted 10-15-2007 at 11:10:08       [Reply]  [Send Email]
churm cinnabar jackboy africanization garlic revigorate frequent undelayed
Bill Clinton jabs Richard Gere on AIDS statement
http://www.price-gnade.com


Bob Highfill    Posted 01-04-2007 at 16:11:43       [Reply]  [Send Email]
Hi, I'm trying to find a coil/module for a Dolmar 109 chainsaw can anyone help. I've looked all over the internet.


j.d. hinojosa    Posted 12-14-2003 at 18:29:05       [Reply]  [Send Email]
i need a piston with ring, and also the cylinder for a concrete saw for sachs dolmar where can i order this parts.


Dan Koczak    Posted 12-02-2003 at 11:39:09       [Reply]  [Send Email]
i need a piston and a cylinder for a sachs dolmar 119. It has a 20 in bar and a .404 pitch chain. I cant find parts for this saw anywhere.Any help would be appriciated!


TOM TASSET    Posted 11-19-2002 at 15:20:59       [Reply]  [Send Email]
I need the ring that fits onto the cylinder of the model 112 Sachs Dolmar Chainsaw. Please let me know where to get one ASAP,,Thank You


Gilbert Bode    Posted 11-18-2005 at 13:22:37       [Reply]  [Send Email]
I need parts for a sachs-dolmar model 112 chainsaw


bob schruf    Posted 01-15-2006 at 17:24:59       [Reply]  [Send Email]
Hello Gilbert; did you ever find an address for your parts, I am looking for parts for a 114 for the father-in-law, can you help. Thanks


jon aldridge    Posted 03-09-2005 at 12:04:24       [Reply]  [Send Email]
I need the chain oil resovoir filler cap for a sachs-dolmar 100 chainsaw.


Karl Noble    Posted 10-27-2003 at 05:50:32       [Reply]  [Send Email]
Sounds encouraging that so many of you are looking for parts to keep your Sach D saws up and running. I have a Sach D 116 and I'm looking for an owner's manual - mine got destroyed. If you have one that you would copy for me or if you have a lead where I can purchase one, I'd certainly like to hear from you. I'd pay you for your troubles if you have a manual and can send me a copy. Many thanks


JIM    Posted 09-10-2003 at 15:00:57       [Reply]  [No Email]
www.Dolmar.com


Bernie Bays    Posted 04-21-2006 at 15:24:33       [Reply]  [Send Email]
Go to www.dolmar.com click on Distributers find nearest one to you & call them for dealers near you I found 6 dealers in a 70 mile radius. I also have a 116 120 owners manual about 25 pages to copy if your interested.


Ray Snover    Posted 03-27-2004 at 05:09:24       [Reply]  [Send Email]
Go to the Makita website you can get the manual and parts list.Let me know how you make out.
Ray


Jennifer Donovan    Posted 10-16-2007 at 05:00:49       [Reply]  [Send Email]
bandoline junk scyphus datively chronograph metapolitic geisotherm coelozoic
Anti-Violence Project of Victoria
http://www.flags.net/MONG.htm


TOM TASSET    Posted 11-19-2002 at 14:51:34       [Reply]  [Send Email]
Hello,,I am from Kansas, I need to know where I can buy a ring for the piston on my Sachs Dolmar Model 112 chainsaw, Please let me know as soon as possible


mike routledge    Posted 01-24-2003 at 13:50:20       [Reply]  [Send Email]
i run a sachs dolmar 153 100cc and have had trouble getting parts. but i believe makita u.k may still carry some parts.


DHunter    Posted 07-02-2002 at 18:12:27       [Reply]  [No Email]
I agree that the Sachs Dolmar is (was) a great chain saw. There is a place in Houston, Tx that has parts but for the life of me I can't remember the name. I do know that parts are becoming harder to find. I did a Google search and found the site below where you can make an inquiry. Hope it helps. Good luck.


Frank Burnouf    Posted 09-10-2005 at 21:25:50       [Reply]  [Send Email]
Try any makita tools repair depot.


Hogman    Posted 07-02-2002 at 10:54:37       [Reply]  [No Email]
Howdy Mike,what State are You in?This might be a startin point. Tha few times I have needed anything for My 117 I have gone to Millers Hardware Lawn mower shop in Harrison Ark.
As You no doubt know We are blest with German
supply problems. But, in this case it's worth it as tha sachs D 117 is no doubt tha best dadblamed chain saw ever made and I have or have had a passle of others. In tha last 12 years I replaced tha recoil starter pawl thing caused by a keeper comin out . Chain bars and air filters are just natural consumeables.

If You wish I'll dredge up Millers address,will take some diggin. I'm in S/W Mo.


Tom Auer    Posted 01-19-2007 at 16:38:18       [Reply]  [Send Email]
I have a Sachs Dolmar 120 SI chainsaw.

I need a clutch drive. I am trying to find someone near who sells parts.

I live in Webster, Wisconsin 54893

715/259-4444.



George Kelly    Posted 09-16-2003 at 17:59:52       [Reply]  [Send Email]
I have a Sach Dolmar chain saw. Its a 1987, 120 and the serial # is 206391. I need an electrical module. If anyone can help me find this part please let me know.


johan.    Posted 08-25-2004 at 14:07:40       [Reply]  [Send Email]
hello.

are you still looking for the 120 sachs part?
i have it if you want.
th johan.


Terry Filuk    Posted 03-30-2007 at 07:48:42       [Reply]  [Send Email]
looking for parts for a Sacks Dolmar KMS4 Wankel chainsaw I need the flywheel side crankbrg+seal and crankshaft


Kenneth    Posted 06-02-2008 at 17:24:37       [Reply]  [Send Email]
looking for ignition coils for a 123 and a 112.


[Return to Topics]



[Home] [Search]

Copyright © 1999-2013 KountryLife.com
All Rights Reserved
A Country Living Resource and Community