Country Living
Country Living, Country Skills
Country People

KountryLife.com - A Country Living Resource and Community
Community
Message Board
Country Topics
Trading Post
Memory Lane
Country Skills
Country Cooking

Channels
Gardening
Livestock
The Kitchen
Machinery
Tools

Photographs
Photo Gallery
Vintage Photos
Special Collections

Fun
Country Humor
Country Sounds
Coloring Book
Interactive Story

Farm Tractors
Pictures
Tractor Parts
Tractor Manuals

Miscellaneous
Classic Trucks
Antique Tractors
Modern Tractors
Site Map
Links Page
Contact Us

  
Country Discussion Topics
To add your comments to this topic, click on one of the 'Reply' links below.

Pioneer chain saws
[Return to Topics]

b.petrusic    Posted 04-20-2001 at 18:03:45       [Reply]  [Send Email]
I have a 20 year old Pioneer chain saw (Model P40) that needs a bit of fixing up (piston and cylinder). Does anyone know where I can get parts.
It is greatly appreciated
B. Petrusic


Weez    Posted 06-10-2009 at 08:41:38       [Reply]  [Send Email]
I have myself an old Pioneer 1200A who set in the barn for an indeterminate number of years. Everything appears to be complete, it turns, has compression and spark, and appears to be getting fuel. However, it will not start. It ran, a little before I pulled the carb apart, and the gaskets and diaphragms seem okay, but i didnt note where the high and low adjustment screws were set, what are the original settings (approximate at least) so maybe i can get it started again? Hope somebody knows more about this than me. Thanks in advance.


franklin k. knowlton    Posted 04-20-2009 at 14:58:32       [Reply]  [Send Email]
I just purchased an older Pioneer chainsaw from a garage sale. I would guess that it was manufactured in 1950"s or 1960"s. It has about a 44" bar and new chain and overall weighs about 60 lbs. more or less. I need pictures so I can match models as the saw does not appear to have any numbers on it. It turns over well and I have not had a chance to see if it has fire so that it can be started. Anyone with any knowledge could sure help me. Appears the saw is a powerhouse as far as power is concerned and was manufactured for old growth fir trees in the past. Thanks,Frank ,izac27@toledotel-wb.com


Oaks    Posted 11-11-2008 at 20:53:16       [Reply]  [Send Email]
Wanted P40 running or not....



kurt chittum    Posted 01-11-2009 at 09:51:31       [Reply]  [Send Email]
i am a logger in virginia turpins outdoor power equipment has lot of stuf 54o 463 3321 from twinty years place this were people can see it


Allen Cutter    Posted 07-08-2008 at 15:46:18       [Reply]  [Send Email]
I AM LOOKING FOR A STARTER PULLEY FOR A PIONEER M# FM SAW. A NEW ONE OR A GOOD USED ONE.


peter Kincaid    Posted 07-14-2008 at 14:47:27       [Reply]  [Send Email]
I have P40, maybe 30 yrs old, just need to know what the oil/fuel
ratio is. Thanks, Peter


C KLEINE    Posted 07-22-2009 at 12:49:00       [Reply]  [Send Email]
I HAVE P-26 MY OLD BOOK SAID 20TO 1, BUT YOU CAN RUN 32TO 1 OR 40 TO 1 BECAUSE THE OIL MIXES ARE MUCH BETTER THAN 30YRS AGO WHEN YOU WERE MIXING IN REG 30 WEIGHT MOTOR OIL.


Gary L. Harris    Posted 03-03-2009 at 13:01:00       [Reply]  [Send Email]
Im looking for the same part that you were looking for for the pioneer model FM did you find where you could locate one. If so would you please let me know.
thanks
Gary


Mike    Posted 04-05-2009 at 14:35:44       [Reply]  [Send Email]
Peter the fuel oil ratio is 24:1 or a 1/3 pint to a gallon of gas.This is from a service manual.



Joe Murone    Posted 10-06-2007 at 17:26:01       [Reply]  [Send Email]
I recieved a p-26 pioneer chain saw & got it running & didn't notice a oiler button, is this model a self oiler?


simmons    Posted 10-07-2007 at 12:03:57       [Reply]  [Send Email]
I have a P26 model and they do not have a pump oiler...they are self oiling...I need a condensor and pick up coil to get mine running...it quit last year...can not find the parts...if you know where i can . let me know.


colin watkins    Posted 09-18-2007 at 07:29:05       [Reply]  [Send Email]
i have a pioneer 620 chainsaw which has been stood in my shed for a while, it,s all complete but a non starter. the model number is S620,SERIAL 193051.


tom    Posted 10-01-2007 at 07:43:52       [Reply]  [Send Email]
check the spark fist, if has spark then clean the carb. and adjust. If no spark pull the flywheel and clean and adjust the points. That's about the only thing that stops those old Pioneers. Tom


debbie burt    Posted 11-15-2004 at 18:13:53       [Reply]  [Send Email]
Looking for a push primer line for a 3200 pioneer chain saw.


Don S    Posted 10-14-2004 at 08:58:24       [Reply]  [Send Email]
I have a Pioneer Chain Saw Model F M (Farm Saw) and I need a electronic modular. Any ideas


Denny    Posted 09-28-2004 at 11:59:09       [Reply]  [No Email]
Quality Small Engine Service Center has been able to help me with Pioneer parts. 205-295-2042

They also have a web site. Quality Small Engine.


Vic Territo    Posted 11-05-2007 at 10:59:17       [Reply]  [Send Email]
I NEED BOTH CASE HALFS & HANDLE FOR A PIONEER
FARM SAW mdl. FM 80 SER. 2 167305.
I WOULD APPRECIATE ANY HELP.


ben mccaslin    Posted 10-07-2006 at 12:54:31       [Reply]  [Send Email]
I have a saw just like yours and am looking for a bar could you tell me what kind you use and where you get it thanks


BAERS LAWN GARDEN    Posted 08-28-2006 at 11:46:37       [Reply]  [Send Email]
WE MANY OLD PIONEER PARTS IN STOCK TOO MANY TO MENTION PLEASE CALL FOR MORE INFO 301-733-8229


Lynn Smith    Posted 06-09-2004 at 02:19:57       [Reply]  [Send Email]
Have a Pioneer chainsaw Serial No. RA 52049.
Has Pioneer name on covers, IEL on fuel filler cap and Fairbanks Morse on pull cord cover. How do I find the model number? Am interested to know the original colours. The body was yellow but did the lettering have a different colour and if so what? Any help or pictures from a manual or sales information could help.
Thanks


marc    Posted 11-13-2007 at 11:16:18       [Reply]  [No Email]

http://www.acresinternet.com/cscc.nsf/ed1d619968136da688256af40002b8f7/fb647dcc59038d3f88256af9001b5608?OpenDocument


tomas    Posted 05-19-2004 at 20:43:17       [Reply]  [Send Email]
I have a 1981 pioneer farmsaw model, FS serial #2352921 with 18" bar for sale. Ran great till igniter failed. very good shape. oned by little old lady! San diego


Vinny    Posted 02-22-2004 at 20:37:30       [Reply]  [Send Email]
I have a Pioneer chain saw model 1074. I'm looking for a set of piston rings for it. This is my last resort following a long search,it appears Pioneer is long gone. Does anyone have any contact points or parts help?
Thanks, Vinny


Terry    Posted 09-30-2005 at 10:26:41       [Reply]  [Send Email]
Still have the chainsaw?


robert a pioneer 1074    Posted 12-01-2008 at 19:03:59       [Reply]  [Send Email]
piston rings for a 1074.
did you have any luck?
I am how looking for rings for mine


Kevin    Posted 10-06-2005 at 19:38:31       [Reply]  [Send Email]
Pioneer parts in stock.


Andy Petkus    Posted 01-21-2008 at 19:14:09       [Reply]  [Send Email]
I have a pioneer model 1074 and need a cover for the air filter.


Gary    Posted 10-17-2005 at 17:15:28       [Reply]  [Send Email]
I have a Pioneer 1074 and think I need a new coil/spark plug wire. The saw will start and run for 2 or 3 minutes. When the engine warms, I believe the spark plug wire (fully saturated in oil) begins to miss and the engine dies. If you have this part, please email me at the email shown in this reply.
Thanks, Gary


Matt    Posted 07-10-2004 at 13:33:06       [Reply]  [Send Email]
I have a pioneer p28 chainsaw and really need to get a clutch for it, either new or second hand, can anyone help please.


Rick. c/o Cedar power equ    Posted 01-20-2004 at 18:38:15       [Reply]  [Send Email]
HAVE A GOOD STOCK OF OLDER PIONEER CHAIN SAW PARTS,ALSO HOMELITE PARTS.


Dick Williard    Posted 05-23-2009 at 07:02:04       [Reply]  [Send Email]
I need an air filter and cover for a P21 model approx 1975 vintage. The cover is green and the engine has a choke not a primer button. Thanks


Steve    Posted 12-23-2008 at 14:26:55       [Reply]  [Send Email]
Have a P28 and need a clutch assembly for it. Can anyone help


ron moore    Posted 12-09-2008 at 10:48:58       [Reply]  [Send Email]
I have apioneer saw i would like to buy amanual with parts list for a model p20 i need to know the spark plug # i dont know what elese i may need the saw hasnt been ran for 20 years


EDWARD    Posted 08-26-2007 at 20:06:25       [Reply]  [Send Email]
i have a pioneer P40 saw i need ring and probly piostion thanks


sallie mcmurray    Posted 04-05-2008 at 18:10:17       [Reply]  [Send Email]

I AM LOOKING FOR A COIL FOR A PIONEER CHAINSAW MODLE NO. FM 80 SERIAL NO S2 298052.


tom bogenreif    Posted 10-05-2007 at 04:14:20       [Reply]  [Send Email]
I am looking for a flywheel for a P-51 Pioneer chainsaw. If you could help me i would greatly appreciate it. Part number from owners manuel is 432148. Thanks.


Bret    Posted 05-24-2007 at 12:24:35       [Reply]  [Send Email]
I have a pioneer p20 I am in need of an air filter cover. If you can help email me. Thanks


ryan    Posted 07-26-2008 at 19:18:26       [Reply]  [Send Email]
I have a flywheel that i think its off a p51
If you now how to id this contact


Kevin    Posted 09-13-2004 at 11:20:57       [Reply]  [Send Email]
I am looking for some minor parts for my Pioneer NU-17. Please contact me if you do.


Bob Haynes    Posted 07-15-2004 at 12:05:29       [Reply]  [Send Email]
I am looking for a coil for a Pioneer Farmsaw or I have heard that a Homelite XL7 will work. Do you have anything.


ted    Posted 09-03-2004 at 23:21:31       [Reply]  [Send Email]
I have an older Pioneer Chain saw model FM 1980 also called Farm Saw for which I need a Prestolite coil. Are these any longer available?


bruce    Posted 07-08-2004 at 20:12:30       [Reply]  [Send Email]
please send any info about parts for pioneer saws


Homer Nicholson    Posted 05-22-2004 at 19:49:48       [Reply]  [Send Email]
sir: I just saw your followup about pioneer chain saws, was glad to see someone has parts for these. I have a p40 pioneer also a p20
pioneer and a pioneer partner. but I need engine block for the p40 as the cylinder and block are scored. Could you e-mail me a list of what you have, and prices ? I live in Pennsylvania.
thank you appreciate it.


bruce    Posted 06-27-2004 at 16:43:01       [Reply]  [Send Email]
do you have starter spring for 1983-4 farmsaw 2, thanks bruce


JOHN LYTLE    Posted 03-29-2004 at 15:21:10       [Reply]  [Send Email]
i'm looking for parts for a p 41. can you help/


Chad Peters    Posted 10-24-2005 at 18:05:10       [Reply]  [Send Email]
I am looking for some info. on a pioneer model
R.A. would like to know cu. in. of this saw

Thank you,
Chad & Mason Peters


Marc    Posted 11-13-2007 at 11:18:58       [Reply]  [No Email]

Check out this site for a ton of old chainsaw info:
http://www.acresinternet.com/cscc.nsf/ed1d619968136da688256af40002b8f7/fb647dcc59038d3f88256af9001b5608?OpenDocument


Mike Ryan    Posted 01-01-2004 at 20:38:17       [Reply]  [Send Email]
I have a P-21 Pioneer chain saw. 1978 Model.

I need a plastic cowling cover that fits over the filter on the carburetor.

Anybody out there know where I can get one?
Many thanks in advance.

Mike Ryan
Milton, Ontario
Canada


EDWARD DANAHER    Posted 06-11-2007 at 06:26:35       [Reply]  [Send Email]
YOUR SAW IS A 5 HORSEPOWER ONE.


lozzer1    Posted 04-12-2004 at 22:27:26       [Reply]  [Send Email]
HELP!! I need a capacitor discharge ignotion for a Pioneer P41S chainsaw made about 1970 and sold in Australia. The rest of the saw is great.
Cheers


Rob Dog    Posted 03-21-2009 at 05:24:08       [Reply]  [Send Email]
Australian P series....a mate of mine scored the entire parts of Pioneer when a firm went out of them here in Tasmania about 15 years ago..he has enough to build several saws.If you are wondering where Tas is,look underneath Australia. However I am looking for a muffler for a 3270 and an engine gasket for a P28. Can anyone help.


gary    Posted 12-13-2003 at 10:58:15       [Reply]  [Send Email]
HELLO
I AM DEAF AND 35 YEARS OLD. YOU HAVE A CHAINSAW.I NEED YOU SEND THE UPS. I DONT KNOW HOW MUCH PRICE IS FOR BOX WEIGHTS. UP TO 30 DOLLARS I THINK SO.
YOU WILL PACK IN THE BOX. YOU NEED GET SOFT COTTON OR OTHER SOMETHING TO PACK IN THE BOX FOR NEW CHAINSAW. I WILL BE HAPPY FOR CHRISTMAS TIME!!
I AM POOR MAN I CANT AFFORD TO BUY THE CHAINSAW. I HAVE PROBLEM WITH MONEY FOR BILLING AND RENT MORE ETC. I NEED YOU GIVE ME SOME GIFT FOR CHAINSAW??I WILL TELL YOU WHERE AND ADDRESS WHEN YOU SEND ME BACK I WILL SEND YOU BACK?? HAVE A MERRY CHRISTMAS. MY EMAIL IS MERRYCHRISTMAS32000@YAHOO.COM


Ken McAdams    Posted 12-04-2003 at 08:57:48       [Reply]  [Send Email]
I have a Pioneer P60 w/ a 32" bar & chain. After looking diligently and countless long distance phone calls(which the wife won't appreciate), I've found a dealer on the internet that warehouses parts for Pioneer saws. The name of the company is Outdoor Power Products and they are in northwestern Minnesota USA.

They were very helpful and said they could scare up parts for these saws


JOHN LYTLE    Posted 03-29-2004 at 15:24:47       [Reply]  [Send Email]
HEY KEN, CAN YOU GIVE ME A CONTACT PERSON OR PHONE NUMBER FOR OUTDOOR PRODUCTS IN MINN.?


Ryan Mcneill    Posted 02-20-2004 at 14:11:03       [Reply]  [Send Email]
Hi I read your commets on the internet and I was woundering if you had a phone number or an address for Outdoor Power Products. I have an old pioneer and I need some parts for it. Please let me know. Thanks Ryan


S Williams    Posted 11-18-2003 at 20:40:56       [Reply]  [Send Email]
I am inquiring about the"farmsaw" pioneer made. I need a chain for it and i am having a hard time locating one. On the bar I have these #s 475344 also 18-058-3-8. These #s are kind of worn but this is what they look like.

can some help me?


Bill    Posted 07-19-2004 at 08:04:18       [Reply]  [Send Email]
Check out this place: http://www.planopower.com
I'm sure you will need a 20", Replacement chan sizw 3/8'.058, number of drive links 72., got that from the web site. I have a farmsaw.


Sherri Williams    Posted 11-18-2003 at 20:39:04       [Reply]  [Send Email]
I am inquiring about the farmsaw pioneer made. I need a chain for it and i am having a hard time locating one. On the bar I have these #s 475344 also 18-058-3-8. These #s are kind of worn but this is what they look like.

can some help me?


Sherri Williams    Posted 11-18-2003 at 20:31:19       [Reply]  [Send Email]
I am requiring about your farmsaw. I need a chain for it and i am having a hard time locating one. On the bar i have these #s 475344 also 18-058-3-8 these #s are kind of worn but this is what they look like

can you help me?


John S.    Posted 10-04-2002 at 15:56:12       [Reply]  [No Email]
addresses for pioneer chain saws OMC-Lincoln P.O. Box 82409 Lincoln,Nebraska 68501 or Outboard marine corporation Waukegan,Illinois 60085 also have heard they were bought out by Polin chain saws. Hope this helps


Charles Grifall    Posted 11-01-2006 at 17:32:14       [Reply]  [Send Email]
I need some parts for Pioneer Chain Saw Model No. P20 Serial No.1101811 Thanks


John S.    Posted 10-04-2002 at 15:54:02       [Reply]  [No Email]
addresses for pioneer chain saws OMC-Lincoln P.O. Box 82409 Lincoln,Nebraska 68501 or Outboard marine corporation Waukegan,Illinois 60085 also have heard they were bought out by Polin chain saws. Hope this helps


Gary Chapman    Posted 10-07-2006 at 18:32:16       [Reply]  [Send Email]
D'day

I have a Pioneer 450, old I know but its in great nick and I am after parts, plug cover plate, mufler plate, rings, bearings, gasket and seals. Any dealers that maybe able to help me can reply direct to me and we can do business. I am in Australia so we can use my email happyg4@optusnet.com.au I look forward to a reply
Cheers


John Pope    Posted 07-23-2002 at 21:57:35       [Reply]  [Send Email]

Reference: P20 Pioneer Chain Saw

Iam trying to obtain new cylinder and piston assembly for my trusty P20.

Am I in luck and if so what other parts are available?
Cheers:

John Pope


Fabrizio    Posted 11-29-2005 at 08:20:45       [Reply]  [Send Email]
Good morning!
Wishing you every success in your research.. perhaps you can help me with a similar request:
I am looking for the oil pump (including rubber fittings) for the Pioneer saw P20.
If you have any contact for Pioneer Saws Ltd. in canada , I would greatly appreciate if you could send this information to me.

Thank you and best regards.

Fabrizio Pula


Graeme Beveridge    Posted 07-03-2002 at 04:51:42       [Reply]  [Send Email]
Does anyone know where I could source some piston rings for a Pioneer P40 Chainsaw? Preferably in Australia


Mark Fulton    Posted 07-01-2002 at 04:41:08       [Reply]  [Send Email]
Im sorry i cant help anyone here, i seem to have the same problem. I baught a second hand Pioneer saw 14 years ago. Its a model 1450 29-30inch bar with .404 chain.I started it recently after not running for 6 years. I had trouble getting parts back then in Australia, i dont want to see the saw die . Can anyone help????


David R. Brown    Posted 05-29-2002 at 17:14:38       [Reply]  [Send Email]
I have a P25, made in 1980 that I need a filter cover and filter element for. Can anybody help!!!


M.C. Martin    Posted 12-30-2005 at 13:43:57       [Reply]  [Send Email]
I also have a Pioneer P25 and need a filter cover and filter. Did you ever find one? please E-Mail me if you have any info.


merrill anders    Posted 02-09-2008 at 17:26:23       [Reply]  [Send Email]
I need a P25 side cover if there is one out there.


Danny    Posted 01-01-2002 at 13:25:32       [Reply]  [No Email]
pioneer partner
775 neal drive
peterborough, ontario
k9j6x7
tel 705 748 5333
this was in my orginal paperwork, I have a p39. hope this helps


tony prochilo    Posted 10-19-2003 at 18:23:15       [Reply]  [Send Email]
My father handed down a pioneer chainsaw to me that he has not used in about 15 years. I think it is a 3270sc model with easy arc starting. I was just wondering if anyone knows how the chain gets lubricated. I took the cover off of the chain and all I see is a small piece of hose about 1/4 of an inch away from the chain itself. how does the oil get to the chain? Thanking you in advance


Rob Dog    Posted 03-21-2009 at 05:14:38       [Reply]  [No Email]
I also have a Pioneer 3270 ... Australian made ... I was looking at mine the other day and wondering the same thing ... except mine comes through a metal tube .... but works fine ..... with Pioneers if it works then its best to leave them alone. Cheers Rob


Bill Milley    Posted 09-21-2003 at 12:24:16       [Reply]  [Send Email]
I purchased an old Pioneer model 3200 chain saw and am looking for a manual. Could anyone help me?
Regards, Bill


John Mitchell    Posted 10-17-2002 at 20:25:55       [Reply]  [Send Email]
I have a model 1200a pioneer chain saw that i would like to restore and would life to find a parts soarse and also an overhaul and maintiance manual for this saw. The dates on this saw are 1972-1978. I would apreciate any help i can get.


Mike    Posted 04-05-2009 at 15:30:28       [Reply]  [Send Email]
If you need a service manual on the P3200 I can help you I have one.


BRYAN BURNS    Posted 07-27-2009 at 12:00:20       [Reply]  [Send Email]
Hello I am looking for a owners manual for my Pioneer P20 chainsaw. If you have any ideas please let me know.I would greatly appreciate it.


Larry totten    Posted 08-15-2002 at 14:58:24       [Reply]  [Send Email]
I have lost my owners manual for a p51 pioneer chain saw can you help acquire a copy


Mike    Posted 04-05-2009 at 15:27:36       [Reply]  [Send Email]
If you need a service manual on the P1200 I can help you I have one.


walt    Posted 04-21-2001 at 19:47:07       [Reply]  [No Email]
Try posting this question here, maybe someone can help.


Mike    Posted 04-05-2009 at 15:24:16       [Reply]  [Send Email]
If you are looking for a service manual on the P51 I can help you I have one.


[Return to Topics]



[Home] [Search]

Copyright © 1999-2013 KountryLife.com
All Rights Reserved
A Country Living Resource and Community