Country Living
Country Living, Country Skills
Country People

KountryLife.com - A Country Living Resource and Community
Community
Message Board
Country Topics
Trading Post
Memory Lane
Country Skills
Country Cooking

Channels
Gardening
Livestock
The Kitchen
Machinery
Tools

Photographs
Photo Gallery
Vintage Photos
Special Collections

Fun
Country Humor
Country Sounds
Coloring Book
Interactive Story

Farm Tractors
Pictures
Tractor Parts
Tractor Manuals

Miscellaneous
Classic Trucks
Antique Tractors
Modern Tractors
Site Map
Links Page
Contact Us

  
Country Discussion Topics
To add your comments to this topic, click on one of the 'Reply' links below.

Lawnmower repair
[Return to Topics]

Carey Counsil    Posted 07-08-2003 at 19:01:43       [Reply]  [Send Email]
I have a Craftsman lawnmower. When the mower is running, it runs well. But when I release the clutch and/or engage the blades it throttles down like I shut the key off. When I disengage the blades and/or step back down on the clutch it runs fine once again. I feel it is probably one of those pesky safety sensors, but where would I find it if it is, or what else could it be?? I'm baffled. Please help


Nic    Posted 08-30-2003 at 11:57:54       [Reply]  [Send Email]
I have a 2 year old craftsman lawnmower. The gas spilled out of the tank through the fuel filter. I removed the fuel filter and the gas was spilling out of the small hose like water from a water hose. Any suggestions what may be wrong with it and tips for repair??


Ludwig    Posted 07-08-2003 at 19:21:18       [Reply]  [No Email]
#1 Make sure thats actually whats happening. Once its shut down pull the sparkplug and verify that theres no spark.

#2 Start following wires around the deck arms. Find the little sensor and disconnect the wire.

You aren't in reverse when this happens are you? Most mowers today won't let you mow in reverse. I don't know what the theory is, but they won't let you do it.


Carey Counsil    Posted 07-09-2003 at 18:28:56       [Reply]  [Send Email]
IT WORKED...I followed the wires from the deck and clutch and disconnected the whole plug. It removed all of the safetys, including the seat sensor, a pain in the neck anyway. I appreciate your help.


Clod    Posted 07-08-2003 at 19:05:51       [Reply]  [No Email]
They all ground,Some you must lift or lower the decks.But you can get the main ground wire and an ohm metter and work things till you find the one.SHIFTER,CLUTCH.SEAT ,Maybe Deck height,,There will be others who can help you,Just watch your post here.


[Return to Topics]



[Home] [Search]

Copyright © 1999-2013 KountryLife.com
All Rights Reserved
A Country Living Resource and Community