Country Living
Country Living, Country Skills
Country People - A Country Living Resource and Community
Message Board
Country Topics
Trading Post
Memory Lane
Country Skills
Country Cooking

The Kitchen

Photo Gallery
Vintage Photos
Special Collections

Country Humor
Country Sounds
Coloring Book
Interactive Story

Farm Tractors
Tractor Parts
Tractor Manuals

Classic Trucks
Antique Tractors
Modern Tractors
Site Map
Links Page
Contact Us

Country Discussion Topics
To add your comments to this topic, click on one of the 'Reply' links below.

To Bob Ontario
[Return to Topics]

Clod    Posted 10-02-2003 at 17:52:48       [Reply]  [No Email]
Thanks on the hydro steering info..I looked today up under the panels..There is a small hydro motor on the end.. (LOOKS LIKE)So you must have called it right as a mETERING MOTOR steering..I>>I Will misss this tonight if you answer ,,I saw no ID or brad info or anything on that steering mech..But I must have the lines right because the wheel has not spun of its own inititive..I got( LOOKING FROM THE WHEEL SIDE) LEFT AND RIGHT TUBES..THEN BEHIND THAT is PRESSURE IN on right..then dup on left..The welder will weld up his leaking line tomarrow so..I hope its right..If you see a prob ,,Drop A note here for monyana..Gotta go thanks pal>

Ron,Ar    Posted 10-02-2003 at 20:17:01       [Reply]  [No Email]
Do we have to call him CAPTAIN CLOD now? Reminds me of Forrest Gump and the shrimp boat.

Clod    Posted 10-04-2003 at 12:52:10       [Reply]  [No Email]
The boss ,,Former Army chopper pilot is about as resonable as that Platoon leaded Forrest Gump saved.Ha ha! He flipped a D model in Vietnam..He must have bumped his head pretty hard.I find answers for the tech problems and he rejects them untill all else fails.( Just to show me the boss is right,,)In the end he says..Hey I got an idea..Lets try this way//Which is actually the way I suggested previously..Now he has refused Ontario Bobs advice.So I went to a pal who owns a construction company and found a dirt machine with the same steering as the boat..So I guess he will find Bobs advice useful soon.

Bob/Ont    Posted 10-02-2003 at 18:14:34       [Reply]  [Send Email]
Hi Clod, you can grab my email from here if you want to talk about the lines on it. I think I know what you have there. They can power a small cyl direct or be used as a pilot system system to control a spool valve to a heavy cyl.That must be a good sized boat you have down there.
Later Bob

~Lenore    Posted 10-02-2003 at 19:30:46       [Reply]  [No Email]

He showed me this picture of a boat like it.
He said it is exactlly the same size, color and all.
It will go 30 knots, he said.

Bob/Ont    Posted 10-03-2003 at 18:27:35       [Reply]  [Send Email]
That sure is a big Boat. Thanks Lenore.
Later Bob

Clod    Posted 10-04-2003 at 12:56:39       [Reply]  [No Email]
Thanks Lenore..You added 10 knots to the speed..Leroy would give you a pat on the back for that..The boat is 65 feet ..Two V12-- 71 Detroits.Just rebuilt so it is expected move along pretty good.Going to grab Bobs address ..I hope.

toolman    Posted 10-02-2003 at 18:03:04       [Reply]  [No Email]
clod i just sent him an email told him you were here , maybe he,ll get it right away.

Bob/Ont    Posted 10-02-2003 at 18:08:32       [Reply]  [Send Email]
Oh there you guys are, thought you had put out to sea in that leaky boat.
Later Bob

toolman    Posted 10-02-2003 at 19:47:03       [Reply]  [No Email]
suppose clod would take us fishin for the winter there bob,oh do ya feel any different there in the centre of the universe now that you all are liberals.

[Return to Topics]

[Home] [Search]

Copyright © 1999-2013
All Rights Reserved
A Country Living Resource and Community