Country Living
Country Living, Country Skills
Country People - A Country Living Resource and Community
Message Board
Country Topics
Trading Post
Memory Lane
Country Skills
Country Cooking

The Kitchen

Photo Gallery
Vintage Photos
Special Collections

Country Humor
Country Sounds
Coloring Book
Interactive Story

Farm Tractors
Tractor Parts
Tractor Manuals

Classic Trucks
Antique Tractors
Modern Tractors
Site Map
Links Page
Contact Us

Country Discussion Topics
To add your comments to this topic, click on one of the 'Reply' links below.

PVC Sausage stuffer
[Return to Topics]

Bob the butcher    Posted 12-11-2003 at 20:51:28       [Reply]  [No Email]
Need help finding plans for a stuffer operating on water or air pressure. thanks-bob

bowman1969    Posted 02-29-2008 at 08:49:46       [Reply]  [No Email]
go to

jim timmermann    Posted 10-07-2006 at 18:15:49       [Reply]  [Send Email]

i was wondering if you ever found any plans for a pvc stuffer and if you did if you would share them?

Tim LeBlanc    Posted 10-21-2004 at 08:34:21       [Reply]  [Send Email]
I just made a sausage stuffer out of 10 inch stainless pipe. It should hold at least 55 lbs at a time and is air operated. I got the idea from the old E-Z Pack water stuffers. (Go to Zuber Inc. website and look at the 100 lb stuffer for the drawings)Instead of water, I use air to drive the piston from the bottom upward. Cap the bottom of your pipe and on the top lid, place a 1" ball valve to control output. Hardest part is finding a seamless pipe that i.d size is true in diameter. The piston I had made from teflon. You could make a smaller one with CPVC but fittings are expensive when you get into big pipe sizes.

[Return to Topics]

[Home] [Search]

Copyright © 1999-2013
All Rights Reserved
A Country Living Resource and Community