Country Talk Discussion Board|
Re: Re: Re: Re: Re: 3 Point Utility Scoop fin
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Larry 8N75381 on April 04, 2004 at 12:11:20 from (22.214.171.124):
In Reply to: Re: Re: Re: Re: 3 Point Utility Scoop fin posted by Lazy Al on April 04, 2004 at 09:52:01:
Here's pict that shows what you are intrested in.
The handle is fastened to a square tube that has a smaller square bar inside. When you pull the handle it turns the tube and bar. There are two beveled pieces with pins inside them attached to the tube and bar. A spring inside the tube keeps the bar pushed out. The beveled pieces "cam" against the mating pieces in the frame and pull the locking pins out of the "ears" on the scoop body. BAMMMM!!! Down the scoop goes! :-)
There is a catch that holds the handle in the "released" position. When you lower the tractor's lift arms so the scoop and frame come together, the catch hits the scoop body and lets the handle go back up letting the pins engage the ears to hold the scoop and frame together.
Follow the link in the previous post to seee more pictures. If you click on a file name it will open OR if you click on "Parent Directory" you can browse around in a BUNCH of images that I
posted to the TractorForum before it got shut off for uploads. Luckily it is still accessable.
Copyright © 1999-2013 KountryLife.com
All Rights Reserved
A Country Living Resource and Community