Re: Jungers Stove

Posted by bob fill on December 14, 2008 at 20:54:56 from (24.236.185.149):

In Reply to: Jungers Stove posted by Tom Banttari on November 26, 2002 at 11:14:15:

the information i got from Jack was very useful, he sent a copy of the original manual and included some extra service information about how to service the carb. to get mine started i had to clean the burners by removing them from the stove and scraping them with an old file and wirebrushing everything. there should be four concentric catalitic "cans", a ring that goes on top of cans 2 and 3, and a center cap for the smallest cap. fill the bottom tray with 90% isopropil alcohol (warmed up to at least 70 degrees F), light with a long neck lighter, wait 3 minutes and turn to start position. wait about 20 minutes then turn up about 1/8 turn every 5 minutes until desired level is achieved.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Jungers Stove Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.